TL;DR: Futures spreads pair a long and a short futures leg, so profit comes from the gap between them, not market direction. On November 4, 2026, one long December crude contract lost $7,970; a December/January spread lost $300. Calendar spreads use two months of one product, while crack and crush spreads link inputs and outputs. Recognized spreads get margin credits, but ratio, legging, liquidity and delivery risk remain.
On November 4, 2026, December crude oil futures settled $7.97 lower than the day before. A trader long one December contract lost $7,970. A trader long December and short January lost $300.
That gap is what futures spreads are about. You stop betting on where one price goes and start betting on how two prices move relative to each other. The trade is often calmer than an outright position. That calm is also the trap: it tempts traders to size up because the margin is smaller, and it hides risks an outright trader never has to think about.
Here is how futures spreads are built and quoted, the main types, worked examples with real exchange settlements and illustrative round numbers, how spread margin works, and the risks that stay in a two-leg position.
What Are Futures Spreads

Futures spreads are positions that buy one futures contract and sell another at the same time, so the profit or loss comes from the change in the price difference between the two legs. CME Group's spread course puts it plainly: spread traders are more concerned with the relationship between the legs than with the actual prices or the direction of the market.
The spread price is usually written as one leg minus the other:
- Spread = price of leg A minus price of leg B
- Buying the spread means buying leg A and selling leg B, so you gain if the difference rises.
- Selling the spread means selling leg A and buying leg B, so you gain if the difference falls.
The leg order matters more than it looks. "Buy June, sell December" is unambiguous. "Buy the June/December spread" is only safe once you have confirmed which leg the exchange or platform treats as leg A. Traders describe the right idea and send the opposite order more often than anyone likes to admit.
How Exchange-Listed Futures Spreads Are Quoted
Many common futures spreads trade on CME Globex as their own instrument, with one price for the whole combination. Calendar spreads are the most common. Some spread instruments also get a finer price increment than the outright contracts.
The E-mini S&P 500 (ES) is a good example. Per CME's contract specifications, read November 4, 2026:
| ES quote | Minimum tick | Value per tick |
|---|---|---|
| Outright futures | 0.25 index points | $12.50 |
| Calendar spread | 0.05 index points | $2.50 |
A smaller tick means the spread can be priced more finely, which matters because the relationship between two months usually moves far less than either month on its own.
Related lesson: How tick size sets the dollar value of each price move
Futures Spread Profit and Loss on a Real Crude Oil Day
The cleanest way to see how futures spreads make money is to compare one real day for an outright position and a spread. WTI crude oil futures (CL) cover 1,000 barrels, so each $0.01 move is worth $10.00 and each $1.00 move is worth $1,000 per contract.
CME settlement prices for the two nearest CL contracts:
| CL contract | Settle November 3, 2026 | Settle November 4, 2026 | Change per contract |
|---|---|---|---|
| December 2026 | $96.09 | $88.12 | minus $7,970 |
| January 2027 | $94.77 | $87.10 | minus $7,670 |
| December minus January | $1.32 | $1.02 | minus $300 per spread |
Three traders held positions through that settlement:
- Long one December contract: lost $7,970.
- Long December, short January: the December leg lost $7,970 and the January leg gained $7,670, a net loss of $300.
- Short December, long January: a net gain of $300.
The spread trader was not immune to the crude move. The December leg still dropped hard. But the short January leg absorbed most of it, and the result came from the $0.30 narrowing of the gap between the months. The $300 move was less than 4% of the outright move that day. That is the whole idea of spread trading, and also its limit: when the relationship moves against you, the spread loses money even on a day the outright market does exactly what you expected.
Types of Futures Spreads

Futures spreads fall into a few families. CME Group groups them as intramarket (calendar) spreads, intermarket spreads and commodity product spreads, and traders add labels for location, yield curve and multi-leg structures. The table maps each type to its legs and a typical example.
| Spread type | Legs | Example | Typical ratio |
|---|---|---|---|
| Calendar (intramarket) | Same product, two delivery months | Long December ES, short March ES | 1:1 |
| Intercommodity (intermarket) | Different but related products, usually same month | Gold vs silver, E-mini S&P 500 vs E-mini Russell 2000 | Set by contract size and volatility |
| Commodity product (processing) | Raw input vs processed outputs | Crude oil vs gasoline and heating oil (crack), soybeans vs meal and oil (crush) | 3:2:1 crack, 10:11:9 board crush |
| Location | Similar commodity priced at different delivery points or benchmarks | WTI vs Brent crude | 1:1 |
| Yield curve | Interest-rate futures on different maturities | 2-year vs 10-year Treasury note futures | 2:1 by notional |
| Butterfly and condor | Three or four months of one product | Long 1 March, short 2 June, long 1 September | 1:2:1 or 1:1:1:1 |
| Options spreads on futures | Two or more options on a futures contract | Calendar spread options on grain futures | Varies by strategy |
Ratios matter because the legs rarely carry equal dollar exposure. CME notes that WTI/Brent trades 1:1, while the 2-year versus 10-year Treasury spread is done 2:1 because the 2-year note future has $200,000 of notional value and the 10-year has $100,000.
Butterfly and Condor Futures Spreads
A butterfly futures spread is a spread of two calendar spreads that share a middle month. CME's margin rules describe the recognized butterfly as positions in consecutive quarterly months in a +1:-2:+1 or -1:+2:-1 configuration, such as March, June and September. A condor stretches the same idea over four consecutive quarterly months, +1:-1:-1:+1 or the reverse.
A long butterfly gains when the middle month weakens relative to the two outer months, the shape you would expect if a temporary bulge in the curve flattens out. These structures are mostly traded by professionals in interest-rate and energy curves. CME's own spread series calls complex spreads like butterflies, crushes and cracks a professional's tool.
Options Spreads on Futures
Options spreads on futures are a separate family. They combine options on a futures contract rather than futures legs. A bull call spread, for example, buys one call and sells another call at a higher strike with the same expiration, so both the maximum gain and the maximum loss are capped.
CME also lists calendar spread options in some markets, which are options on the spread between two futures months. If exercised, they deliver one long and one short futures position. They let a trader take a view on a futures spread with a defined premium outlay, at the cost of options pricing, time decay and a second layer of contract rules.
Calendar Spreads in Futures

Calendar spreads in futures buy one delivery month and sell another month of the same contract. CME also calls them intramarket spreads, and the CFTC glossary calls them time spreads. The trade is a view on the shape of the futures curve rather than on the price level.
Two words describe that shape:
- Contango: later delivery months trade above the nearest month.
- Backwardation: later delivery months trade below the nearest month.
Neither label tells you which leg to buy. It only tells you where the curve sits today.
Contango and Backwardation in Two Real Curves
The ES and CL curves at the November 4, 2026 settlement show both shapes on the same day.
| Curve as of November 4, 2026 settlement | Nearby month | Next month | Gap |
|---|---|---|---|
| E-mini S&P 500 | December 2026 at 7,720.50 | March 2027 at 7,795.25 | March 74.75 points higher (contango) |
| WTI crude oil | December 2026 at $88.12 | January 2027 at $87.10 | January $1.02 lower (backwardation) |
The ES gap comes from cost of carry. CME's equity index lessons describe it as financing cost against dividend income: when short-term interest rates sit above the index's dividend yield, futures tend to trade above spot, and deferred months above nearby ones. The gap shrinks as each contract approaches expiration, because futures and the index settle to the same figure.
The CL curve was backwardated all the way out: July 2027 settled at $80.35, $7.77 below December 2026. In a physical commodity, backwardation usually signals that buyers pay up for barrels now rather than later. CL is physically delivered at Cushing, Oklahoma, so storage and nearby supply feed directly into the gap between months.
The calendar spread is usually much calmer than either leg. From the November 3 to November 4 settlement, ES December rose 123.75 points, or $6,187.50 per contract. The March minus December spread moved from 73.25 to 74.75 points, a 1.50-point change. At $50 per point that is $75 per spread, or 30 spread ticks of $2.50.
Front Month vs Back Month in a Calendar Spread
The front month and back month in a calendar spread rarely behave alike, and the difference shows up in both price and liquidity.
On price, the front month usually reacts harder to near-term news because it is closest to delivery. A supply shock, a short squeeze into delivery or a storage problem hits the nearby contract first. Deferred months tend to reflect longer-run expectations. That is why calendar spreads in commodities can swing sharply near expiration while the same spread six months out barely moves.
On liquidity, the gap can be huge. At the November 4, 2026 settlement, December ES traded 2,329,405 contracts with open interest of 1,958,622. March ES traded 6,882 contracts with open interest of 25,921. Before quoting a calendar spread, check volume and the bid-ask spread in both legs, not just the front month.
Hedgers use calendar spreads to roll. CME notes that a hedger rolling a futures position from one month to the next is effectively trading a calendar spread: selling the expiring month and buying the next one in one transaction.
Seasonal Calendar Spreads
Seasonal calendar spreads target relationships that tend to repeat with the calendar. CME's spread series lists the July/November soybean spread as a classic old-crop versus new-crop trade: July soybeans price the end of the old crop year, while November prices the new harvest. CBOT's soybean crop year runs November through September.
Energy has its own seasons. The EIA notes that natural gas storage typically falls from November through March as heating demand pulls gas out of storage, which affects how winter and summer contract months price relative to each other.
Seasonality is a starting question, not a confirmation. A drought, an export ban, a refinery outage or an unusually mild winter can break a pattern that held for years. Use history to ask why a spread usually behaves a certain way, then check whether this year's conditions support it.
Intercommodity Futures Spreads
Intercommodity futures spreads go long one product and short a different but related product. CME calls the basic version an intermarket spread: two related futures, usually the same contract month, traded against each other. The best-known are the processing spreads, where the legs are an input and the outputs made from it.
Related lesson: How pairs trading and spread trading compare
Crack Spread Example With Crude Oil and Refined Products
The crack spread is the gap between crude oil and the gasoline and diesel refined from it, a rough gauge of refining margins. CME quotes it in dollars per barrel. Crude trades per barrel, while RBOB gasoline (RB) and NY Harbor ULSD, often called heating oil (HO), trade per gallon, so each product price is multiplied by 42 gallons per barrel. RB and HO contracts are 42,000 gallons, the same 1,000 barrels as one CL contract.
A typical refinery yields roughly twice as much gasoline as distillate, so traders focus on the 3:2:1 crack: three crude contracts against two gasoline and one heating oil contract. Using illustrative round prices:
- Crude oil $80.00 per barrel
- Gasoline $2.40 per gallon, or $100.80 per barrel
- Heating oil $2.80 per gallon, or $117.60 per barrel
3:2:1 crack = (2 x $100.80 + $117.60 minus 3 x $80.00) / 3 = $79.20 / 3 = $26.40 per barrel
Buying that crack means buying 2 RB and 1 HO and selling 3 CL. The position covers 3,000 barrels, so every $1.00 change in the crack is worth $3,000.
Now suppose crude rises $4.00 to $84.00 while gasoline rises to $2.50 and heating oil to $2.90:
| Leg | Change | Profit or loss |
|---|---|---|
| Long 2 RB | plus $0.10 per gallon x 42,000 x 2 | plus $8,400 |
| Long 1 HO | plus $0.10 per gallon x 42,000 | plus $4,200 |
| Short 3 CL | minus $4.00 per barrel x 1,000 x 3 | minus $12,000 |
| Net 3:2:1 crack | $26.40 to $26.60 | plus $600 |
Every leg moved thousands of dollars, and the spread made $600. The crack trader was right about products holding up against crude, not about crude's direction.
CME lists factors that typically push cracks around: refinery maintenance or outages strengthen them, summer driving season supports gasoline cracks, winter supports diesel cracks, and a geopolitical spike in crude can weaken cracks at first because crude rises faster than products.
Soybean Crush Spread Example
The soybean crush spread compares soybeans with the meal and oil they are crushed into. CME's reference guide converts each product to dollars per bushel of soybeans: one bushel yields about 44 pounds of meal and 11 pounds of oil, so meal (priced per short ton) is multiplied by 0.022 and oil is converted with the 11-pound yield.
Using illustrative round prices:
- Soybeans $10.50 per bushel
- Soybean meal $300 per short ton, x 0.022 = $6.60 per bushel
- Soybean oil $0.45 per pound, x 11 = $4.95 per bushel
Board crush = $6.60 + $4.95 minus $10.50 = $1.05 per bushel
A one-contract-per-leg crush is badly weighted because the three contracts cover different quantities: soybeans are 5,000 bushels, meal is 100 short tons and oil is 60,000 pounds. The exchange-defined board crush uses 30 contracts: 10 soybean, 11 meal and 9 oil. CME's guide shows the math: 50,000 bushels of soybeans yield 1,100 short tons of meal (11 contracts) and 550,000 pounds of oil (about 9 contracts). The board crush trades on CME Globex as a single spread order, so traders do not have to leg into 30 contracts one at a time.
Selling the crush (buying soybeans, selling meal and oil) is the processor's hedge. Buying the crush, the reverse, profits if product prices gain on soybeans.
Spark Spreads and Other Ratio Spreads
The spark spread applies the same logic to power plants. The EIA defines it as the electricity price minus the cost of the natural gas needed to generate it:
Spark spread ($/MWh) = power price minus (natural gas price x heat rate)
The heat rate measures plant efficiency. The EIA's benchmark is 7,000 Btu per kilowatt-hour, which is 7 mmBtu per megawatt-hour. With illustrative power at $50 per MWh and gas at $3.00 per mmBtu, the spark spread is $50 minus $21, or $29 per MWh. The EIA notes spark spreads are more volatile than crack spreads because wholesale power prices swing hard with demand.
Not every intercommodity spread is a processing chain. Gold against silver, platinum against gold and E-mini S&P 500 against E-mini Russell 2000 are relative-value spreads between related markets. CME describes the gold-silver ratio as a read on the economy: silver has far more industrial demand, so the ratio tends to widen in uncertainty and silver tends to outperform in recoveries. These spreads need a deliberate ratio because the contracts differ in size and volatility, and an equal contract count can leave one leg dominating the result.
Benefits of Trading Futures Spreads
The benefits of trading futures spreads come from isolating one relationship instead of taking the whole market's move. CME's own pros and cons list is a fair summary, and it includes the costs.
- You trade the relationship, not the direction. A long December/short January crude spread cares about December gaining on January. Both legs can rise or fall and the spread can still work.
- Shared moves partly cancel. On November 4, 2026, the December/January CL spread moved $300 while the December outright moved $7,970. A spread can let you hold a view through news that would shake out an outright position.
- Lower margin on recognized spreads. Exchanges grant spread credits because the legs offset. CME says crack spreads may need up to 30% less capital than an outright gasoline or diesel position.
- More trade ideas. Spreads let you act on views an outright trade cannot express: small caps beating large caps, refining margins widening or old-crop supply tightening.
- Profit in up or down markets. If you are long WTI and short Brent, you profit when WTI gains on Brent, whether both are rising or both are falling.
The honest other side, also from CME: spreads need two legs, so transaction costs are higher, and while risk is generally (not always) reduced, returns usually shrink too. A spread that moves $300 on a big day will not make up for weeks of commissions on both legs.
The mistake to watch for is using the lower margin to trade more spreads than the account can carry. A smaller daily swing per spread times a bigger position can land you right back at outright-sized risk, with more moving parts.
Margin for Futures Spreads and Spread Credits
Margin for futures spreads is usually lower than the combined margin of the two legs, because the clearing house recognizes that the legs offset. CME Clearing sets performance bond with SPAN, which looks at the whole portfolio and gives credit for positions that tend to move together.
CME's spread course gives an illustrative soybean/corn example. If outright soybean margin were $3,000 and corn $1,500, the two legs alone would need $4,500. With a 75% spread credit, initial margin would be $1,125.
Calendar spreads use an intra-commodity charge instead. CME's margin page shows the method with illustrative numbers: if month 2 carries $500 outright margin, month 4 carries $750 and the intra-spread charge between them is $50, a long month 2/short month 4 spread costs ($750 minus $500) plus $50, or $300.
When Futures Spread Credits Shrink or Disappear
Spread credits are conditional. CME's rules and education pages flag several cases:
- Wrong ratio. Margin offsets apply only when the spread matches the clearing house's recognized ratio. If the clearing house recognizes 2:1 and you trade 3:1, the extra contracts get outright margin.
- Delivery month. Inter-commodity spreads are not recognized when either contract is in its delivery month, and if either leg is in the delivery month the requirement becomes the higher of the two outright delivery-month requirements.
- Broker add-ons. Your futures broker can require more than the exchange minimum, and many do for spreads near expiry.
- Changing rates. Exchanges change margins and spread credits with market conditions. A credit that existed when you opened can be cut while you hold the position.
Lower margin does not mean a lower maximum loss. It is collateral based on modeled offsets. The relationship can still gap, one leg can be halted while the other trades, and a sizing mistake can turn a spread into a mostly outright position. Treat any margin quote as a current requirement to confirm, never a fixed number.
Futures Spread Risks and Risk Management
Futures spread risks are different from outright risks, not absent. The list below covers what stays in a two-leg position and what to do about each.
Relationship and Correlation Risk in Futures Spreads
The relationship you expected can break. Gold and silver usually move together until industrial demand pulls silver one way. Two crude months usually move together until a delivery squeeze hits only the front month. The November 4, 2026 CL example shows the stakes: a trader long December and short January was right about crude falling and still lost $300, because the front month fell faster.
Manage it by stating the driver in writing (storage, carry, crop year, refinery margin) and the evidence that would prove it wrong. When that evidence shows up, close both legs.
Ratio and Sizing Risk
Equal contract counts do not mean equal exposure. Compare contract size, tick value and typical daily movement of each leg before choosing a ratio, and use the exchange's recognized ratio where one exists. Then size by dollars per spread point. In the 3:2:1 crack, each $1.00 move in the crack is $3,000 on the full position, so a $2.00 adverse move is a $6,000 loss even though no single leg looks dramatic.
Set your stop on the spread value, not on either leg. A stop on one leg alone can close half the spread and leave you holding an outright position at the worst moment.
Legging and Execution Risk
Legging means entering each side as a separate order. If the first leg fills and the market moves before the second fills, you are holding an outright position. CME notes that dedicated calendar spread markets let you trade the spread with no legging risk, while intermarket spreads may carry it unless there is an exchange-listed spread contract or you use auto-spreading software.
The temptation is to leg in to save a tick on entry. That tick is rarely worth the seconds or minutes you spend holding an unhedged outright if news hits. Where an exchange-listed spread exists, trade it as one order. After every fill, check that both legs are on, in the right months and quantities.
Liquidity, Delivery and Cost Risk
Each leg needs enough liquidity for your entry and exit. Deferred months can be thin: March ES traded 6,882 contracts on November 4, 2026 against 2,329,405 for December. A spread quote can look tight while one leg has a wide market behind it.
Expiry and delivery rules apply to each leg separately. Physically delivered contracts like CL carry delivery obligations, and margin treatment changes in the delivery month. Know the last trading day and any first notice day for every leg before you enter.
Costs double. Every spread pays commissions and fees on at least two legs, and a board crush pays them on 30 contracts. Count them against the size of the spread moves you expect.
Getting Started With Futures Spreads Step by Step
Getting started with futures spreads is mostly about precision before the first order. A loose idea like "energy demand should rise" supports both legs at once and does not define a spread trade. These steps turn an idea into one.
- Pick one exchange-recognized spread with an active spread market, such as a calendar spread in a liquid product, before anything multi-leg.
- Write the full symbols, months and years for every leg, and confirm which leg the quote treats as leg A.
- State which change makes money: the spread widening, narrowing or crossing zero.
- Convert each leg to dollars per point and set the ratio, using the exchange's recognized ratio where one exists.
- Name the driver and the invalidation: what should move the relationship and what would prove it wrong.
- Check margin with your broker, plus volume, bid-ask spread and expiry dates for each leg.
- Size by dollars per spread point, set the exit on the spread value and plan to close all legs together.
- Practice in a simulator or with paper trades until reading spread quotes and checking fills is routine.
Analysis Methods for Futures Spreads
Analysis for futures spreads works on the spread itself, not on each leg. Chart the spread value over time (most platforms can plot one contract minus another), then combine three angles:
- Fundamental drivers. Inventories, storage costs, interest rates against dividends, crop reports, refinery runs and power demand move relationships between months and products.
- Seasonal tendencies. Compare the spread across past years for the same calendar window, then ask whether this year's supply and demand look similar.
- Technical levels on the spread chart. Support, resistance and trend on the spread line are often cleaner than on either leg, but check that a level is not just an artifact of a contract roll.
A spread setup is ready when the driver, the level and the invalidation all agree. If one of the three is missing, waiting is the right call. A spread that looks cheap on the chart with no reason behind it is usually cheap for a reason you have not found yet.
Futures Spreads Under Funded Account Rules
Futures spreads and prop-firm rules often collide, so check before you plan one on a funded account. At Tradeify, opposing positions in the same instrument or in two products from the same Product Group count as hedging, in one account or across accounts, so a long ES/short NQ spread, a gold/silver spread or a soybean/meal/oil crush is not allowed, and we treat a calendar spread in one product the same way. Opposite positions in different groups, such as long GC and short ZC, are permitted, but every position must be closed by 4:45 PM ET, so nothing carries overnight the way most exchange spreads do.
Futures Spreads FAQ
What is an example of a futures spread?
Buying December crude oil futures and selling January crude oil futures is a calendar spread. On November 4, 2026, that spread lost $300 per spread while a long December outright lost $7,970. The result depended on December weakening against January, not on crude falling.
Are futures spreads less risky than outright futures?
Futures spreads are often less volatile because a move shared by both legs partly cancels. They still carry relationship, ratio, legging, liquidity and delivery risk. A spread can lose money on a day the outright market moves your way.
Can a futures spread be negative?
Yes. A spread is the difference between two prices, so it can sit above or below zero. The sign alone says nothing about profit. Your leg order and entry price decide whether a move helped you.
What is the difference between a calendar spread and an intercommodity spread?
A calendar spread uses two delivery months of the same product, such as December and March ES. An intercommodity spread uses different but related products, such as crude oil against gasoline. Intercommodity spreads usually need more work to match contract sizes and dollar exposure.
Do futures spreads require less margin?
Exchange-recognized futures spreads usually get a spread credit, so margin is lower than the two legs combined. The credit only applies at the recognized ratio and can shrink in the delivery month or when the exchange changes rates. Lower margin does not lower the maximum loss.
What does it mean to buy a futures spread?
Buying a futures spread means buying the first-named leg and selling the second. You profit if the price of the first leg rises relative to the second. Always confirm the platform's leg order before sending the order.
Futures and futures spreads involve substantial risk of loss, and leverage means losses can exceed what you expect. Spread margin, contract specifications and exchange rules change, and broker or trading-program rules can be stricter than the exchange. Prices in this guide are either dated exchange settlements or illustrative round numbers, not quotes. Results in simulated or funded evaluation accounts are simulated and differ from live trading. Nothing here is investment, tax or legal advice.

