• Get 30% Off with code "NOV"
  • 40% OFF GROWTH ACCOUNTS
  • ENDS 13 NOVEMBER, 11:59PM EST

Futures Month Codes and Contract Symbols Explained

Close-up of a keyboard lit by a futures chart, under the headline Futures Month Codes and Contract Symbols.

TL;DR: Futures month codes are 12 letters, F for January through Z for December, placed between a root symbol and a year. ESZ26 reads as E-mini S&P 500, December, 2026. Every product uses the same letters, but each one lists only certain months. A month code is not an expiry date, so check listed months, volume and the last trading day first.

A futures symbol packs three answers into a few characters: which market, which month and which year. Month codes are the middle piece, a single letter that turns a product like ES into one specific contract such as ESZ26.

The twelve letters take an afternoon to learn. The costly mistakes come later, and they rarely come from a wrong letter. They come from a right letter on the wrong contract: a month the product never lists, a month almost nobody is trading, or a December contract that stops trading in November.

This guide covers the letters, the year codes, root symbols by asset class, which months each product actually lists, why each month trades at its own price, and a short check worth running on any symbol before an order goes in.

How a Futures Contract Symbol Is Built

A futures symbol is built from a root, a month code and a year code, so ESZ26 is the December 2026 E-mini S&P 500 contract.

Every exchange-traded futures symbol is built in the same order: root, then month code, then year code.

  • Root. One to three characters naming the product. ES is the E-mini S&P 500, CL is WTI crude oil, GC is gold, and 6E is the euro.
  • Month code. One letter for the contract month. Z is December.
  • Year code. The contract year, written as one, two or four digits depending on where you are looking.

CME Group's introductory lesson builds a symbol exactly this way. Its example is the January 2019 E-mini S&P 500 contract: ES, then F for January, then 9 for 2019, which gives ESF9 on CME Globex. Swap the F for an H and you have the March 2019 contract, ESH9.

Nothing else about the product changes when you swap the letter. The root stays fixed, and the last few characters decide which expiration you are actually trading.

The same December 2026 E-mini S&P 500 contract can show up in four forms.

Format Example Where it appears
One-digit year ESZ6 CME Globex display codes in CME's lesson
Two-digit year ESZ26 CME's product calendar
Four-digit year ESZ2026 Some charting platforms
Slash prefix /ESZ26 Brokerages that also list stocks

The forward slash is not part of the exchange code. Many brokerages add it so a futures search does not land on a stock that shares the same letters: ES is also the stock ticker of Eversource Energy, and CL is Colgate-Palmolive. Type the slash if your platform uses one and leave it off if it does not.

Related lesson: Reading the price fields that sit around a symbol

Futures Month Codes From January to December

The twelve futures month codes grouped by quarter, F G H, J K M, N Q U and V X Z, with the last letter of each group, H, M, U and Z, marking the quarterly months.

The month code table is the one part of a futures symbol that never changes between products. CME Group publishes the same twelve letters, and they mean the same month whether the root is ES, CL or ZC.

Month Code Quarterly month
January F No
February G No
March H Yes
April J No
May K No
June M Yes
July N No
August Q No
September U Yes
October V No
November X No
December Z Yes

The four quarterly letters, H, M, U and Z, are the ones to know without looking. Equity index futures such as ES and NQ and Treasury futures such as ZN list only those four months.

A simple way to memorize the order is to split the year into quarters: F G H, J K M, N Q U, V X Z. The last letter of each group is the quarterly month, so if you can recall the groups you can recall the quarterly codes too.

Why Month Codes Skip Letters

The month codes run in alphabetical order from F to Z, but they skip 14 of the 26 letters: A, B, C, D, E, I, L, O, P, R, S, T, W and Y. Twelve letters are left, one for each month.

No exchange rulebook explains the choice. The story repeated in broker glossaries and trader forums is that the codes date from trading floors and ticker tape, where letters like I and O could be misread as the numbers 1 and 0, and other letters were already shorthand for something else. CME's own lesson says only that many codes originated on the trading floor to carry the most information in the fewest characters. Treat the history as background, not as a rule you need.

The useful lesson here is about reading, not history. A month letter can also appear inside a root, and that is where people misread symbols. Read any futures symbol from the right-hand end instead:

  1. Take the digits at the end. That is the year.
  2. Take the single letter before the digits. That is the month.
  3. Everything left over is the root.

MESM27 reads as 27 for 2027, M for June, and MES for the Micro E-mini S&P 500. The M at the front and the M before the year are doing different jobs, and reading from the right keeps them apart.

Year Codes in Futures Symbols

The year code is the least standardized part of a futures symbol. CME's lesson uses one digit (ESF9 for 2019), CME's product calendar prints two digits (ESZ26), and some charting platforms want all four (ESZ2026). All three name the same contract when the context is clear.

The one-digit form has a real weakness: it repeats every ten years. For most products that never matters, because nothing is listed a decade out. ES lists 21 consecutive quarters, so its listed run as of November 4, 2026 ends at ESZ31.

Crude oil is different. CME lists CL monthly for the current year and the next 10 calendar years plus 2 more months, which put 135 contract months on the board as of November 4, 2026, running from CLZ26 to CLG38. Both CLZ26 and CLZ36 are listed, so CLZ6 on its own could mean either one. Henry Hub natural gas, listed for the current year and the next 12 calendar years, has the same overlap between NGZ26 and NGZ36.

If you only trade the front month, the nearest year is the one you mean. If you ever work with deferred contracts, use the two-digit form and confirm the expiration date your platform shows next to the symbol rather than trusting a single digit.

Futures Root Symbols by Asset Class

Root symbols carry the product and, through it, the contract size, the exchange and how the contract settles. A few patterns help: many CBOT products start with Z on Globex (ZC, ZS, ZW, ZN), CME currency futures start with 6 (6E, 6J), and micro contracts usually start with M (MES, MCL, MGC).

The root matters more than the month letter when it comes to money. ES and MES track the same index, but ES pays $50 per index point and MES pays $5, ten times less. Mixing them up does not produce an error message. It produces a position ten times larger or smaller than you planned.

Patterns are helpers, not rules. MGC is micro gold, yet M is also the June month code, which is one more reason to read a symbol from the right-hand end.

Equity Index and Interest Rate Root Symbols

Financial futures roots are mostly short and familiar. Equity index contracts settle in cash, while the Treasury note contract is delivered.

Asset class Root Product Contract unit Exchange Settlement
Equity index ES E-mini S&P 500 $50 x S&P 500 Index CME Cash
Equity index MES Micro E-mini S&P 500 $5 x S&P 500 Index CME Cash
Equity index NQ E-mini Nasdaq-100 $20 x Nasdaq-100 Index CME Cash
Interest rates ZN 10-Year T-Note $100,000 face value CBOT Physical delivery

Energy and Metals Root Symbols

Energy and metals roots sit on NYMEX and COMEX. Most full-size contracts here are physically delivered, though the micro crude oil contract settles in cash.

Sector Root Commodity Contract unit Exchange Settlement method
Energy CL WTI crude oil 1,000 barrels NYMEX Physical delivery
Energy MCL Micro WTI crude oil 100 barrels NYMEX Cash
Energy NG Henry Hub natural gas 10,000 MMBtu NYMEX Physical delivery
Metals GC Gold 100 troy ounces COMEX Physical delivery
Metals MGC Micro Gold 10 troy ounces COMEX Physical delivery
Metals SI Silver 5,000 troy ounces COMEX Physical delivery
Metals HG Copper 25,000 pounds COMEX Physical delivery

Grain, Livestock and Currency Root Symbols

Agricultural and currency roots are where clearing codes and Globex codes most often differ, so the root you type may not match the code on an exchange calendar.

Market Root symbol Underlying Contract size Listing exchange How it settles
Grains ZC Corn 5,000 bushels CBOT Physical delivery
Grains ZS Soybeans 5,000 bushels CBOT Physical delivery
Livestock LE Live cattle 40,000 pounds CME Physical delivery
Livestock HE Lean hogs 40,000 pounds CME Cash
Currencies 6E Euro FX 125,000 euro CME Physical delivery
Currencies 6J Japanese yen 12,500,000 yen CME Physical delivery

Which Month Codes Each Product Lists

The month letters are universal, but the months a product offers are not. CME's lesson says it directly: available expiration months vary by product, but the letter after the root always means the same month. Before a month code means anything, check that the product lists it.

Product Root Listed months Month codes
E-mini S&P 500 ES Mar, Jun, Sep, Dec H M U Z
E-mini Nasdaq-100 NQ Mar, Jun, Sep, Dec H M U Z
10-Year T-Note ZN Mar, Jun, Sep, Dec H M U Z
WTI crude oil CL Every month All 12
Henry Hub natural gas NG Every month All 12
Gold GC Every month for 26 consecutive months, then Jun and Dec All 12 near term
Micro Gold MGC Feb, Apr, Jun, Aug, Oct, Dec G J M Q V Z
Corn ZC Mar, May, Jul, Sep, Dec H K N U Z
Chicago wheat ZW Mar, May, Jul, Sep, Dec H K N U Z
Soybeans ZS Jan, Mar, May, Jul, Aug, Sep, Nov F H K N Q U X
Live cattle LE Feb, Apr, Jun, Aug, Oct, Dec G J M Q V Z
Lean hogs HE Feb, Apr, May, Jun, Jul, Aug, Oct, Dec G J K M N Q V Z
Euro FX 6E Quarterly for 20 quarters plus monthly serials for 16 months All 12 near term

Three practical rules come out of the listing table.

  • Equity index contracts are quarterly only. On ES, NQ and their micros, any month letter other than H, M, U or Z means the symbol is wrong. ESG27 does not exist.
  • Full-size and micro contracts can use different cycles. GC lists every month near term, while MGC lists only even months. GCX26 is a real contract; MGCX26 is not.
  • Agricultural cycles differ by crop and animal. Soybeans list November (X), while corn and wheat go from September straight to December. Live cattle lists no November at all.

Listings change over time. Exchanges add products, adjust cycles and retire months, so confirm the product's calendar on the exchange site rather than relying on any printed chart, including this one.

Contract Month Codes and Expiration Dates

A month code names the contract month. It does not say when trading stops, and for some products trading stops before that month even begins.

Contract Contract month Last trading day CME termination rule
ESZ26 December 2026 December 18, 2026 9:30 AM ET on the third Friday of the contract month
CLZ26 December 2026 November 20, 2026 3 business days before the 25th of the prior month
NGZ26 December 2026 November 25, 2026 Third last business day of the prior month
GCZ26 December 2026 December 29, 2026 Third last business day of the contract month
ZCZ26 December 2026 December 14, 2026 Business day before the 15th of the contract month
6EZ26 December 2026 December 14, 2026 2 business days before the third Wednesday

Crude oil is the classic trap. A trader who sees Z and thinks December will find that CLZ26 last trades on November 20, 2026, more than a week before December begins. Gold runs the other way: GCZ26 trades until December 29, 2026, but its first notice day is November 30, 2026, the first day delivery notices can arrive.

Cash Settlement and Physical Delivery by Contract Month

What happens when a contract month expires depends on the settlement method, and the symbol does not show that either. Cash-settled contracts such as ES, MES, MCL and HE end with a final cash payment based on an index or price. Physically delivered contracts such as CL, GC, ZC and LE can end with the actual commodity changing hands, which is why first notice day matters on those products.

The CFTC notes that most futures contracts are closed by offsetting trades and never reach delivery. The obligation is still real if a position is held into the delivery period, so the termination rule belongs on your checklist next to the month code.

Related lesson: The two deadlines a month code does not tell you

Why Each Contract Month Trades at a Different Price

Every month code on a futures curve carries its own price. The gap between months is not noise. It comes from the cost of carrying the underlying asset, and arbitrage keeps it close to that cost.

CME explains this for equity index futures as cost of carry: the futures price reflects the financing cost of holding the stocks, minus the dividends those stocks pay. When financing costs more than the dividends earn, later months price above earlier ones. When dividends earn more than financing costs, futures trade below the cash index, which CME illustrates with a 2016 example in which ESU6 traded 0.76 points under the spot index.

Worked Example of the Gap Between Contract Months

As of the November 3, 2026 settlement, ESZ26 settled at 7,596.75 and ESH27 at 7,670.00. That is a gap of 73.25 points, or $3,662.50 per ES contract, between two symbols that differ by one letter and one digit. It fits CME's carry explanation: the March contract carries about three more months of financing cost, net of dividends.

A round-number version shows the arithmetic. Take an index at 7,000, a 4% financing rate and a 1% dividend yield, which leaves 3% net carry. Over 90 days that is 7,000 x 3% x 90/365, about 51.8 points, so fair value sits near 7,051.8. These inputs are illustrative, not current market rates.

Arbitrage keeps prices near that value. If a futures month traded far above fair value, an arbitrageur could sell the futures, buy the stocks and hold both to expiry, when CME notes futures and spot settle to the same figure. That selling pushes the rich month back toward fair value.

Contango and Backwardation Across Month Codes

Commodities can slope either way. At the same November 3, 2026 settlement, December crude oil settled at 96.09 and July 2027 at 85.08, $11.01 per barrel lower eight months out. The CFTC calls a curve with lower prices in distant months backwardation. Gold sloped up that day, from 3,940.4 for December to 3,972.5 for February, which the CFTC calls contango.

The trading consequence is direct. Switching month codes changes the price you are looking at. A support level marked on December does not sit at the same number on March, and stop prices or notes written in points all shift by the spread when you move from one month to the next.

Related lesson: How carry sets the gap between contract months

Listed Contract Months vs the Active Month

A futures symbol can be valid, listed and still nearly empty. CME settlement data for November 3, 2026 shows how uneven volume gets across month codes for the same product.

Contract Volume Open interest
ES December 2026 1,579,232 1,963,799
ES March 2027 5,104 22,760
ES June 2027 3 1,380
GC November 2026 17 206
GC December 2026 163,000 265,746
GC January 2027 354 656
GC February 2027 20,570 74,394
ZS November 2026 1,816 2,738
ZS January 2027 158,354 374,385

ESZ26 traded about 309 times the volume of ESH27 that day. Both symbols are correctly formed, and a platform will accept an order in either. Only one is where the orders are.

That is the trap. A symbol that loads a chart and accepts an order feels confirmed, but the platform is only telling you the contract exists, not that anyone is trading it.

Gold shows the same split inside one product. December and February carried the volume, while November and January, the months either side of December, barely traded. Every one of those months is listed, so the month code was never the problem.

Soybeans show a handoff in progress. November soybeans last trade on November 13, 2026, and by November 3 the January contract, ZSF27, already had about 87 times November's volume.

The working rule is simple. Compare volume and open interest across the two or three nearest month codes and trade the one where both are highest. A thin month tends to mean wider spreads and fills you did not plan for.

Related lesson: How to tell which month the market is actually using

Rolling to the Next Contract Month

Rolling closes the position in the expiring month, such as ESZ26, and reopens it in the next, such as ESH27, then updates the chart symbol, order ticket and saved price levels.

Rolling a futures position means closing it in the expiring month and opening the same position in a later one, which the CFTC defines as lifting a near position and re-establishing it in a more deferred delivery month. On screen, the symbol is the only thing that changes: ESZ26 becomes ESH27.

For equity index futures, CME publishes a roll date, the Monday before the third Friday of the expiration month. For December 2026 that is December 14, 2026, four days before ESZ26 expires on December 18. After the roll date, the next quarterly month is customarily treated as the lead month.

Other products roll on their own timetable, usually ahead of the last trading day and, on delivered contracts, ahead of first notice day. The calendar tells you when a roll is due; volume tells you when it has happened. When the next month's volume passes the current month's, the market has moved, whatever date it is.

A day trader switching months has three places to update:

  • The chart symbol, so levels come from the contract you will actually trade.
  • The order ticket or DOM, so orders go to the new month.
  • Any saved price levels, because the new month trades at a different price. On ES the gap was 73.25 points at the November 3, 2026 settlement.

Related lesson: What the switch looks like on a continuous chart

Globex Codes vs Clearing Codes in Futures Symbols

The same contract can carry more than one code. CME lists a Globex code, used for electronic trading, and a clearing code, which is what CME's product calendar prints. For many older products the two differ.

Product Globex code Clearing code CME calendar shows
Corn ZC C CZ26
Soybeans ZS S SX26
Chicago wheat ZW W WZ26
Live cattle LE 48 48Z26
Lean hogs HE LN LNZ26
10-Year T-Note ZN 21 21Z26
Euro FX 6E EC ECZ26
Japanese yen 6J J1 J1Z26
E-mini S&P 500 ES ES ESZ26

So if you look up corn on CME's calendar and see CZ26, the symbol a trading platform expects is built from the Globex root: ZCZ26, or ZCZ6 where the platform uses one digit. The month code and year are the same in both. Only the root changes.

Charting platforms add a third layer of symbols: continuous contracts that splice successive months into one long chart. They are useful for looking at history and useless for orders, because no exchange contract carries that symbol.

Weekly Futures Symbols With a Day Code

A month letter cannot tell apart two contracts that expire in the same month, so weekly futures add the day. CME's Bitcoin Friday futures (root BFF) are a clear example. Each contract is 0.02 bitcoin, each Friday has its own contract, trading ends at 4:00 PM New York time on that Friday, and the contract is cash settled.

CME's calendar writes them as root, month code, two-digit year and two-digit day:

  • BFFX2606. November (X) 2026, Friday the 6th.
  • BFFX2613. November 2026, Friday the 13th.
  • BFFZ2604. December (Z) 2026, Friday the 4th.

The month letters work exactly as they do on quarterly and monthly contracts. Only the day number is new, and most futures symbols do not carry one.

Futures vs Forwards and Why Only Futures Have Symbols

A futures symbol works because every contract with that symbol is identical. CME describes exchange-traded futures as standardized: quality, quantity, delivery time and location are set by the exchange, and the only thing left to trade is price. Every contract is centrally cleared, so the clearing house stands between buyer and seller.

A forward contract is the opposite. The CFTC describes it as a cash transaction in which a commercial buyer and seller agree on the quality, quantity and future delivery date themselves, with terms more personalized than futures. Two forwards on the same commodity can differ in size, date and grade, so there is nothing for a shared ticker to point at.

Feature Exchange-traded futures Forward contract
Terms Set by the exchange Negotiated by the two parties
Identifier Root, month code and year The contract document itself
Counterparty Clearing house The other party
Daily settlement price Set by the exchange every day Historically none for most OTC forwards
Getting out Offsetting trade in the same symbol Agreement with the other party

The month code exists because of standardization. Every ESZ26 is the same, so a buyer and a seller who never meet can trade it, and either one can close later by trading the same symbol the other way.

How Hedgers and Speculators Choose Contract Months

The CFTC divides futures users into hedgers, who take futures positions opposite to a cash-market exposure to reduce the risk of price changes, and speculators, who trade to profit from expected price moves. The two groups pick month codes for different reasons.

A hedger picks the month that matches the exposure. Imagine a farmer expecting to sell 50,000 bushels of soybeans after harvest. At 5,000 bushels per ZS contract, that is 10 contracts, and the month code becomes part of the hedge design. A contract that expires before the cash sale leaves the crop unhedged at the end. A contract far beyond the sale may be thinly traded and will need closing early anyway.

A speculator usually has no cash exposure to match. The question is where the volume is, so a speculator follows the active month and rolls when it changes. An ES day trader spends most of the year in one quarterly code at a time and moves to the next around the roll date.

The same symbol can therefore mean very different things to two people holding it. For the hedger it is a date; for the speculator it is a venue.

Checking a Futures Symbol Before You Trade

Six checks catch most symbol errors, and they take less than a minute. Run them before the order, because a wrong month is easy to fix on a chart and expensive to fix in a position.

  1. Read from the right. Year digits, then one month letter; the rest is the root. MESM27 is MES, June, 2027.
  2. Confirm the root. ES and MES track the same index, but one pays $50 per point and the other $5.
  3. Confirm the product lists that month. On ES and NQ, only H, M, U or Z are valid.
  4. Check the year. A one-digit year can repeat a decade later on long-dated products such as CL and NG.
  5. Check the active month. Compare volume and open interest on the two nearest month codes.
  6. Check the dates. Look up the last trading day and, on delivered products, first notice day.

At Tradeify, our accounts follow the same codes with one platform wrinkle. Tradovate, Rithmic, WealthCharts and NinjaTrader write the year as one digit (ESH7), while TradingView and Tradesea use the full year (ESH2027), and TradingView symbols ending in 1!, such as ES1!, are chart-only and cannot be traded. Our Help Center's rule of thumb is to trade the contract CME's calendar shows as the current Globex code. Because every position on our accounts is closed by 4:45 PM ET, rolling simply means choosing a different month for the next session.

Futures Month Codes FAQ

What is the month code for March in futures?

H is March. It is one of the four quarterly months, with June (M), September (U) and December (Z), and the first expiration of the year for quarterly products such as ES and NQ.

What does Z mean in a futures symbol?

Z is December. In ESZ26, ES is the E-mini S&P 500, Z is December and 26 is 2026. It does not always mean the contract trades into December, because CLZ26, December crude oil, last trades on November 20, 2026.

Is ESZ6 the same contract as ESZ26?

Usually, yes. Both name the December 2026 E-mini S&P 500, and the platform decides whether it wants one digit or two. The one-digit form only becomes ambiguous on products listed more than ten years out, such as crude oil and natural gas.

Are futures month codes the same on every exchange?

Yes across CME Group's exchanges (CME, CBOT, NYMEX and COMEX), which all use the same twelve letters. Root symbols and year formats are what vary between platforms, so check those.

Why does my platform show a different symbol than the exchange calendar?

The calendar may show a clearing code (CZ26 for corn) while the platform uses the Globex code (ZCZ26). The platform may also write the year with a different number of digits, or the chart may be on a continuous symbol rather than a real contract month.

Futures trading involves substantial risk of loss, and leveraged futures positions can lose more than expected, including more than the amount deposited. This article is educational and explains how symbols and listing schedules work, not what to trade, and it is not investment advice. Contract specifications, listed months and dates change, so confirm them with the exchange before trading. Funded and evaluation accounts are simulated and do not reproduce live market fills.