TL;DR: Last price, mark price, and mid price value the same contract three ways, and the job decides which one counts. The last price is the latest trade and drives charts and realized P&L. The mid price is the halfway point between bid and ask, a benchmark you usually cannot trade at. The mark price is a venue's fair-value estimate, and on crypto perpetuals it sets unrealized P&L and liquidation. CME futures have no mark price; the daily settlement price does that job.
You open a position and three different numbers describe it. The chart says one thing, the P&L panel says another, and the liquidation or drawdown figure seems to follow a third. It is tempting to assume the platform is wrong. Usually it is not. Each price is built from a different input and used for a different decision, and the trouble starts when you read one while the venue acts on another.
This guide covers what each price measures, how the mark price is calculated, which price triggers stops and liquidations, and how futures handle the same problem with a settlement price. The worked examples use round, illustrative numbers so you can check the math yourself.
Last Price, Mark Price, and Mid Price in One Table
The quickest way to keep last price, mark price, and mid price straight is to ask two questions of each: what is it built from, and what is it used for.
| Price | Built from | Main use | Can you trade at it? |
|---|---|---|---|
| Last price | The most recent executed trade on that venue | Charts, time and sales, realized P&L | It already traded; the next trade may not repeat it |
| Mid price | Best bid plus best ask, divided by two | Spread and execution benchmark, valuation input | Usually not; it often sits between ticks |
| Mark price | Index price, funding basis, order book mid and last price | Unrealized P&L and liquidation on crypto perpetuals | No; venues do not fill orders at it |
| Index price | Weighted spot prices from several exchanges | Anchor for the mark price | No; it is a reference |
| Settlement price | Exchange procedure, such as a closing-window VWAP | Daily mark-to-market on exchange-traded futures | No; it is the official end-of-day value |
A price is only "right" relative to the job it is doing. The chart price is right for reading structure and wrong for planning your exit. The mark price is right for liquidation risk and useless as a fill estimate.
What the Last Price Is
The last price, also called the last traded price, is the price of the most recent trade on the venue you are watching. Binance defines it as the latest transaction price, set by the last trade in the trading history, and uses it to calculate realized P&L. Kraken describes it the same way and adds an important detail: it belongs to one platform, so the last price of the same asset can differ between venues.
You see the last price everywhere. It is the "last" column on a quote board, the price highlighted on a depth of market, every print in time and sales, and the close of every candle on your chart.
Related lesson: Time and Sales
Why the last price can mislead you
The last price is a record of something that already happened. On a busy contract it updates many times a second, so it stays close to the live quotes. On a thin one, it can be stale.
StoneX gives a clean example from deferred-month oats futures. The depth of market showed a bid of 3.36, an ask of 3.44 and a last traded price of 3.40. The last trade sat neatly in the middle, but nobody was offering to trade there right now. A buyer had to pay 3.44. A seller got 3.36. StoneX notes that in an illiquid market, the last trade could have happened one second ago or one day ago.
The other weakness is that one trade sets it. In a thin moment, a single aggressive order can print well away from where the rest of the book is sitting, and that print becomes the last price on your screen. That property is exactly why derivatives venues built the mark price.
What the Mid Price Is and When It Matters

The mid price is the midpoint between the best bid and the best ask: add them and divide by two. If Micro E-mini S&P 500 futures (MES) are quoted at 7,000.00 bid and 7,000.25 ask, the mid price is 7,000.125. All the quotes in this example are illustrative.
That number shows the mid price's first property. MES trades in 0.25-point ticks, so 7,000.125 is not on the price grid. No order can rest there. The mid price is a reference point, not an offer.
Its second property is that it is only as good as the book behind it. With a tight, two-sided market, the mid price is a fair estimate of value. With a wide or one-sided book, it is the average of two prices nobody wants to trade at. In the oats example, the mid price of 3.36 and 3.44 is 3.40, which matched the last trade but still told a seller nothing about where they could actually get out.
Related lesson: Bid-Ask Spread
Where traders use the mid price
- Execution benchmark. US equity market rules measure effective spread against the midpoint of the national best bid and offer when an order arrives. Comparing your fill to the mid price tells you how much of the spread you paid.
- Mark price input. Bybit, Binance and Gate all build part of their mark price from a moving average of the order book mid minus the index price. The mid price feeds the mark, even though you never trade at it.
- Futures settlement fallback. CME's daily settlement rule lists a bid/ask midpoint procedure: in products that use it, the midpoint at the defined settlement time or during the settlement period becomes the settlement price.
So when should a trader look at the mid price? When judging execution quality, when a market has not traded recently, and when you want to know what the spread really costs on your size.
What the Mark Price Is
The mark price is a venue's calculated estimate of what a derivatives contract is fairly worth right now. It is built from several inputs instead of a single trade, and it exists mainly on crypto futures and perpetual swap venues.
Binance says its mark price draws on the contract's last price, the best bid and ask from the order book, the funding rate and a composite average of spot prices on major exchanges. Binance, Bybit and Kraken all state that the mark price, not the last price, is what values open positions and triggers liquidations. Realized P&L still comes from the prices you actually trade at.
Why venues use the mark price instead of the last price
The reasoning is about manipulation and noise. Kraken notes that a large trader could theoretically move the last price on one platform, so the last price is not used to trigger liquidations. Bybit calls its setup a dual-price mechanism, built to stop traders being liquidated because one futures venue drifted away from spot.
Consider the alternative. If liquidations ran off the last price, anyone with enough size could push a thin order book for a second, print a bad trade and force-close other people's positions. Anchoring liquidations to a blended number makes that attack far harder.
The tradeoff is that the mark price is not a price you can hit. You cannot buy or sell at it, and it can sit away from the chart you are watching.
How the Mark Price Is Calculated

Most large crypto venues calculate the mark price as the median of three candidate prices. Binance, Bybit and Gate publish versions of the same formula:
- Price 1 = Index price × (1 + last funding rate × time until next funding ÷ funding interval)
- Price 2 = Index price + a moving average of the basis, where basis = (best bid + best ask) ÷ 2 − index price
- Price 3 = The contract's own last traded price
- Mark price = the median of the three
Taking the median is the clever part. One bad input cannot drag the result, because the middle value of three ignores whichever one runs away.
A worked mark price calculation
Here is the formula with round, illustrative numbers. They are not live market data.
- Index price: 100,300
- Last funding rate: 0.01%, with 6 hours left in an 8 hours funding period
- Moving-average basis: +20
- Last traded price: 100,510
Price 1 = 100,300 × (1 + 0.0001 × 6/8) = 100,307.52. Price 2 = 100,300 + 20 = 100,320. Price 3 = 100,510. Sorted, the three values are 100,307.52, 100,320 and 100,510, so the mark price is 100,320.
The last price is 190 higher than the mark. Someone just paid up on this venue, but the wider market and the order book average do not back that price yet. If the buying holds, the moving-average basis rises and the mark follows. If it was one impatient order, the last price drifts back and the mark barely noticed.
How venues differ on the averaging window
The formula is similar across venues, but the details are not. Binance averages the basis over 30 seconds (60 seconds on its TradFi perpetuals). Bybit uses a 2.5-minute window. Gate samples every second over 5 minutes and can shorten the window to as little as 1 minute when the basis widens quickly. A shorter window reacts faster; a longer one smooths more. Check your venue's own page, because the same position can carry a slightly different mark on two exchanges.
How the Mark Price Tracks the Index Price
The index price is the anchor that keeps the mark price honest. Binance builds its index as a weighted average of the asset's spot price across many exchanges, and even says you can consider the index price the spot price. Kraken describes its index as a basket of spot markets, each with its own weighting.
The mark price is the index plus an adjustment. In the formula, Price 1 adds the part of the next funding payment still to come, and Price 2 adds how far the contract's order book has been trading from the index on average. When funding is near zero and the contract trades in line with spot, the mark price sits very close to the index.
Why the mark price drifts from the index price
A perpetual's mark price drifts from its index price for three reasons, and each one maps to a part of the mark price formula.
- Funding. A positive funding rate means longs are paying shorts, so the funding-adjusted candidate in the mark price formula sits a little over the index. That premium shrinks to zero as the funding time approaches.
- Persistent basis. If the perpetual's order book has traded over spot for the whole averaging window, the basis-adjusted candidate carries that premium into the mark.
- Bad index data. Venues have fallbacks. Bybit says that if a spot source is abnormal or data is missing, it calculates the mark price from its own last traded price. Gate switches to on-exchange contract quotes when its spot index stops being reliable.
That fallback is easy to miss. In the rare moments the index breaks, the mark price can lean on the very last price it was designed to replace, which is exactly when markets tend to be most chaotic.
Price Deviation Caps and Spike Protection
Price deviation caps and spike protection are the guardrails that stop a mark price, or the index under it, from jumping on bad data. Here is how the published versions work.
- Mark price deviation cap. Gate limits how far the mark price may sit from the index. For TradFi contracts the cap is 3%, so with an index of 7,000 the mark is held between 6,790 and 7,210. Crypto contracts get a wider range.
- Mark price spike pause. Gate's spike protection stops the mark price updating when it moves sharply against the last few minutes. Orders still go through, but unrealized P&L freezes so positions are not liquidated on the spike. The mark resumes when price reverts, or eases back to normal if it does not.
- Index source cap. Binance caps any single exchange that drifts more than 3% from the median of its index sources. Using Binance's own example, with a 20,000 median, a +7% outlier counts as 20,600 and a -6% outlier counts as 19,400. BTCUSDT and some other pairs use a tighter 1% cap, and an exchange that has not updated for five minutes gets zero weight.
- Reduce-only mode. Binance says it may put a symbol into reduce-only mode if the mark price moves abnormally fast.
A worked spike example
Take the worked numbers again: Price 1 at 100,307.52, Price 2 at 100,320 and a last price of 100,510. Now one large market sell hits a thin book and prints at 99,000, which is 1,510 lower than the previous last trade, while the order book mid barely moves.
The new median of 99,000, 100,307.52 and 100,320 is 100,307.52. The last price fell 1,510. The mark price fell 12.48. A stop armed on the last price at 99,500 would have fired. A liquidation based on the mark price would not have come close.
Price banding on CME futures
CME futures have no mark price, so the protection sits in the matching engine. CME Globex uses price limits and price banding to protect pricing integrity. Its banding reference follows the CME Globex last price. A stop order whose limit is farther from its trigger than the band allows is rejected, and a stop order with protection can only fill within a set range of its trigger. These rules cap how far a single order can travel. They do not replace the last price with a blended one.
Mark Price vs Last Price on One Position
Mark price vs last price is not a contest one of them wins. The last price tells you what just traded. The mark price tells you what the venue will use to value and, if needed, liquidate your position.
| Question | Last price | Mark price |
|---|---|---|
| What sets it? | The latest trade on this venue | A formula blending index, funding, book mid and last price |
| How fast does it react? | Instantly, to every print | More slowly; built to ignore one-off prints |
| What does it drive? | Charts and realized P&L | Unrealized P&L and liquidation on perpetuals |
| Who can move it? | Any large order in a thin moment | Hard to move without moving several spot markets |
Valuing one perpetual position on each price
Here is an illustrative crypto perpetual trade. You buy 1 BTC at 100,000 using 10 times leverage, so you post $10,000 of margin. A few minutes later the best bid is 100,480, the best ask is 100,520, the last trade printed at 100,510 and the venue's mark price is 100,320.
| Reference | Level | Unrealized P&L on 1 BTC |
|---|---|---|
| Last price | 100,510 | $510 |
| Mid price | 100,500 | $500 |
| Mark price | 100,320 | $320 |
Same position, same second, three different numbers. None of them is wrong. The gap between last and mark is 190, which is 0.19% of the last price but 1.9% of your margin. Leverage is what turns a small price gap into a visible chunk of your account.
So which is better, mark price or last price? For deciding whether you are at risk of liquidation, trust the mark price, because that is what the venue enforces. For judging your fills and planning exits, the last price and the live bid and ask matter more, because that is where trades actually happen.
Which Price Triggers a Liquidation
On crypto perpetual venues, the mark price triggers liquidation. Binance states it directly: liquidation is always triggered when a position's mark price reaches its liquidation price. Bybit and Kraken say the same.
Using the illustrative position (long 1 BTC at 100,000, 10 times leverage, $10,000 margin) and a simplified isolated-margin formula with a 0.5% maintenance margin rate, the liquidation level is:
100,000 × (1 − 1/10) ÷ (1 − 0.005) = 90,452.26
At that price, your equity is $452.26, which equals 0.5% of 90,452.26, the maintenance requirement. Real venues add fees and tiered maintenance rates, so treat this as a teaching formula, not a venue quote.
Does the gap between last and mark matter?
With the mark at 100,320, the distance to liquidation is 9,867.74, or 9.84% of the mark. The 190 gap between last and mark is 1.93% of that distance. On this position, the choice of price does not decide whether you get liquidated; it shifts when. That changes fast once a position is sized close to its liquidation level.
The timing can also surprise you in a fast market. Binance gives an example of a short opened at a mark price of 17,000 with a calculated liquidation price of 17,006. If the mark jumps to 17,100 within a second, the position is liquidated at 17,100, not at the level you saw on screen.
Which Price Triggers Stop Loss and Take Profit Orders
Which price triggers your stop loss and take profit depends on the venue and, often, on a setting you choose. This is the most practical part of the whole topic, because a stop armed on one price and a liquidation measured on another can behave very differently.
- Crypto perpetual venues usually let you choose. Kraken notes that some platforms let traders select the reference price that triggers TP/SL orders. Bybit's order API offers last price, index price or mark price, and defaults stop loss and take profit triggers to the last price. Binance offers mark price or contract (last) price, with contract price as the default.
- Exchange-traded futures trigger on trades. On CME Globex, a stop order does not enter the book until a trade happens at its trigger price. A buy stop's trigger must sit over the last traded price, and a sell stop's trigger under it.
- Platform-managed stops can use their own logic. Tradovate's documentation for its Auto Breakeven and AutoTrail stops says the profit trigger is calculated from the last traded price combined with the quote, not from the last trade alone.
Last-price triggers vs mark-price triggers
Kraken lays out the tradeoff. A stop on the last price fills closer to the price you expected, because it reacts to real trades on your venue. But since liquidation runs on the mark price, a last-price stop placed close to your liquidation level can be beaten to the punch by a mark-price liquidation.
A mark-price stop ignores one-off wicks, such as a single sell order printing far under the rest of the book. The cost is that it may fire while the chart still shows price short of your level, and its fill comes from the live order book, not from the mark.
Setting the trigger price through an API
If you automate, the trigger type is a parameter you must set on purpose. On Binance's futures API the field is workingType, with MARK_PRICE or CONTRACT_PRICE, and it defaults to CONTRACT_PRICE. Binance also has a priceProtect flag, off by default, that blocks a stop from triggering when the gap between mark and contract price is wider than the symbol's threshold. On Bybit, tpTriggerBy and slTriggerBy accept LastPrice, IndexPrice or MarkPrice, and default to LastPrice. A bot that never sets these fields is using the default, whether or not that is what its author meant.
The golden rule for any stop loss is simple: place it where the trade idea is proven wrong, then confirm which price arms it and size the position so that the gap between that price and the one your venue enforces cannot decide the outcome.
How the Last Price Behaves in a Fast Market
In a fast market, the last price can jump several ticks between prints, and orders triggered by it rarely fill exactly at your level. A stop becomes a market order when it is elected, so it fills at the best price available, not at the stop price.
Here is an illustrative MES case. You hold a long with a sell stop at 6,990.00. A news release hits, the last price trades through your level, and the stop fills at 6,988.75. That is 1.25 points of slippage, or $6.25 per contract at $5 per point. The stop did its job of getting you out; it just could not promise the price.
Related lesson: Slippage Explained
Thin books turn one price into several
Size makes it worse when the book is thin. In StoneX's deferred-month oats example, with a 3.36 bid and 3.44 ask, a market order to sell seven contracts filled four at 3.36, two at 3.3525 and one at 3.3425. The average fill was about 3.3554, roughly 4.5 cents lower than the 3.40 last price on the screen.
Exchange rules shape how far this can go. On CME Globex, a market order matches only to the best bid or offer in the book and not beyond, and stop orders with protection cap how far past the trigger they can fill. Those limits reduce runaway fills, but they can also leave part of an order unfilled. In fast conditions, plan for the bid or the ask, not the last price, to be your real exit.
How Unrealized P&L Changes With the Price You Use
Unrealized P&L is your open profit or loss valued at some price, and the price chosen changes the number. Realized P&L only appears when you close, and it always uses the prices you actually traded at.
Take an illustrative futures position: long 4 MES at 6,996.00. MES is worth $5 per index point, with a 0.25-point tick worth $1.25. The market is 7,000.00 bid and 7,000.25 ask, and the last trade printed at the ask.
| Valuation price | Level | Points from entry | Unrealized P&L on 4 MES |
|---|---|---|---|
| Best bid | 7,000.00 | 4.00 | $80.00 |
| Mid price | 7,000.125 | 4.125 | $82.50 |
| Best ask and last price | 7,000.25 | 4.25 | $85.00 |
If your platform values the trade on the last price, it shows $85.00. If you closed right now with a market order, you would sell at the bid and realize $80.00 before commissions. The $5.00 difference is one tick of spread across four contracts.
Related lesson: Realized vs. Unrealized P&L
Unrealized P&L on a perpetual uses the mark price
On crypto perpetuals, venues calculate unrealized P&L from the mark price. Gate writes it out as contracts × multiplier × (mark price − entry price) for a long, and warns that the number displayed can differ from what you settle on closing. Bybit notes that because the last price can briefly drift from the mark, you can see an unrealized profit or loss straight after your order fills. It is not real money yet. It is the gap between the two prices.
Settlement Price, the Futures Version of a Mark Price
The settlement price is the official daily value an exchange uses to mark every open futures position. The CFTC defines it as the daily price at which the clearing organization clears all trades and settles all accounts, and says it is used to determine margin calls. Mark-to-market, in the CFTC's words, is the daily cash flow system that adds each position's gain or loss to or from account balances at the end of each session.
For Micro E-mini equity index futures, CME says daily settlement is the 30-second volume-weighted average price (VWAP) of E-mini trades on Globex between 3:59:30 PM and 4:00:00 PM ET. CME's settlement rule adds that the result must land on a valid tick, rounded to the nearest tick or the tick closer to the prior settlement. Some products use the bid/ask midpoint instead.
Related lesson: Mark-to-Market in Futures
A worked settlement price example
Say, illustratively, that 40 contracts trade at 6,999.50, 60 at 6,999.75 and 20 at 6,999.25 during the settlement window. The VWAP is 6,999.583, which rounds to the nearest tick, 6,999.50.
A position of 4 MES bought at 6,996.00 is then marked at 3.50 points × $5 × 4 = $70.00 for the day. But Globex keeps trading until 5:00 PM ET, with a halt from 4:15 PM to 4:30 PM ET. If the last trade before 5:00 PM prints at 7,001.00, your chart's daily close shows the position up $100.00. That $30.00 gap is not an error. It is the difference between a settlement price and a last price.
Last traded price vs close price
The last traded price and the close price are easy to mix up on futures. The close on a chart is usually the last traded price of the session or bar. The settlement price is set by the exchange's own procedure over a defined window, and it is the number accounts are cleared against. On a futures statement, trust the settlement price; on a candle, you are looking at the last trade.
Live Price Valuation and a Trailing Drawdown Floor
Live prices matter even more on accounts with a hard loss floor, such as prop firm evaluations and simulated funded accounts. When a floor is measured against your balance plus open P&L, an open losing trade counts before you close it. The live valuation is then the number that decides whether the account survives, not the settlement price and not the price you hope to exit at.
That changes how you read the three prices. A P&L panel built on the last price looks slightly better than what you would get by closing at the bid, so the real room to the floor is a little smaller than the screen suggests. On a thin contract, or with a stop that will fill as a market order, leave that gap in your sizing.
On our accounts, the trailing drawdown updates at the end of each trading day but is enforced in real time against net liquidation value, which is your balance plus unrealized P&L on open positions. An open losing position can breach the floor before you close it. On Tradovate you can add the "Dis Drawdown Net Liq" column to the Accounts widget to see your live distance to the floor during the session.
Which Price to Use for Each Trading Job

The practical question is never which price is correct. It is which price the job in front of you is measured in.
| Job | Price that governs it | Why |
|---|---|---|
| Reading the chart | Last price | Candles and ticks are built from trades |
| Filling a market order | Ask to buy, bid to sell | You cross the spread to trade now |
| Judging execution quality | Mid price | Fills are benchmarked against the midpoint |
| Realized P&L | Your fill prices | Money comes from trades that happened |
| Unrealized P&L on a perpetual | Mark price | Venues value open positions on the mark |
| Liquidation on a perpetual | Mark price | The venue enforces against its fair value |
| Daily marking of a futures position | Settlement price | The exchange clears all accounts at one price |
| Stop triggers on CME futures | Trade at the trigger price | Globex stops are elected by trades |
| Stop triggers on a perpetual | Whatever you selected | Last price is often the default |
Related lesson: Order Types Overview
Common Mistakes Reading Last, Mark, and Mid Price
Most price confusion comes from a short list of mistakes. Each one is easy to fix once you name it.
Mistakes with the last price and mid price
- Planning exits around the last price. You will sell at the bid and buy at the ask. On a liquid contract that costs a tick; on a thin contract it can cost several.
- Trusting a mid price on a wide or one-sided book. The mid price of a wide spread is an average of two prices nobody is trading at.
- Comparing a settled number to a live one. Yesterday's settlement and the last trade at 5:00 PM ET describe different moments. A mismatch is usually not a platform error.
Mistakes with the mark price and stop triggers
- Treating the mark price as a fill. Nobody can buy or sell at the mark price. It values the position; the order book fills it.
- Not knowing what arms your stop. A last-price stop can be beaten by a mark-price liquidation, and a mark-price stop can fire while the chart looks fine. Check the setting on every working order.
- Putting the stop right next to the liquidation level. Any gap between last and mark then decides the outcome instead of your plan.
- Assuming every venue calculates the same way. Averaging windows, deviation caps and default trigger prices differ by exchange, so read the rules where you trade.
Mark Price and Last Price FAQ
Which is better, mark price or last price?
Neither is better in general. The mark price is better for judging liquidation risk on a perpetual, because that is what the venue enforces. The last price, together with the live bid and ask, is better for planning entries, exits and judging fills.
What is the last traded price vs. close price?
The last traded price is the most recent trade at any moment. A chart's close is the last trade of a bar or session. On futures, the official end-of-day value is the settlement price, which comes from an exchange procedure and can differ from the final trade.
Is the mid price a price you can trade at?
Usually not. The mid price often falls between ticks, and no order has to be resting there. Treat it as a benchmark for spread cost and execution quality.
Do CME futures use a mark price?
Not in the crypto sense. During the session, platforms show open P&L from live prices, and at the end of each day the exchange marks every position to its settlement price. Stops on CME Globex are triggered by trades.
Why did my stop trigger when the chart never reached it?
The stop was probably armed on a different price from the one you were watching. A mark-price or quote-based trigger can fire while the last price sits short of your level. Check the trigger setting in your platform or venue documentation.
What is the golden rule for stop loss?
Put the stop where your trade idea is proven wrong, not where the loss merely feels uncomfortable. Then confirm which price triggers it and size the trade so slippage or a price gap cannot break your risk plan.
This article is educational and is not financial advice or a recommendation to trade any instrument. Futures, crypto perpetuals and other leveraged products can lose money quickly, and losses can exceed what you expect. All prices, positions and P&L figures here are illustrative examples, not market data; venue formulas and exchange procedures can change, so check the current rules where you trade. Funded and evaluation accounts at prop firms are simulated, and simulated fills can differ from live market fills.

