TL;DR: Price limits and limit moves set how far a futures contract may trade in one session, and what happens at that edge. Corn's limit is $0.35 a bushel ($1,750 a contract) after the November 2, 2026 reset. Index futures use 7%, 13% and 20% downside tiers, plus a 7% overnight band. A locked limit can leave your stop unfilled, so size for the adverse limit.
Most traders meet price limits the expensive way. A position goes against them, the stop triggers but nothing fills, and the quote sits frozen while the loss keeps growing on paper. The platform is not broken. The exchange is doing exactly what its rulebook says, and the rulebook was available before the trade.
This guide explains the rule, the event, the mechanics behind each product group, and what happens to your orders when a contract reaches its band. It finishes with worked numbers and a pre-trade check you can run before you take a position.
What Price Limits and Limit Moves Mean

Price limits and limit moves are two halves of one idea, and most of the confusion comes from treating them as the same thing.
A price limit is a rule. The CFTC glossary defines it as the maximum price advance or decline from the previous day's settlement price permitted during one trading session, as fixed by exchange rules. CME Group describes it as the maximum price range permitted for a futures contract in each trading session.
A limit move is an event. It is what traders call it when price actually travels to that boundary. If price reaches the upper boundary, the contract is limit up. If it reaches the lower boundary, the contract is limit down.
The key detail is what the limit does not do. For CBOT grain and oilseed futures, CME states that a contract cannot trade at a price more than the initial price limit above or below the previous day's settlement. Trading at the limit price is still allowed. Trading beyond it is not. So a limit move caps price; it does not automatically switch the market off.
That is also why a price limit is not a limit order. A limit order is your instruction to buy or sell at a price you choose. A price limit is the exchange's boundary on every order from every participant. Your limit order can be perfectly sensible and still be refused if its price sits outside the exchange's band.
Exchanges set limits for a plain reason. CME says they help restrict a market from moving too far or too fast in a specific period of time. The usual argument is that a pause in price gives participants time to absorb news and reassess, instead of everyone reacting in one disorderly burst.
Related lesson: How halts and pauses differ from limits
How Price Limits Are Calculated and Expanded
The way a price limit is calculated depends on the product group. A number that is right for corn says nothing about the S&P 500, and a number you memorised last season may already be stale.
Grain and oilseed price limits
Grain and oilseed limits are fixed dollar amounts above and below the prior day's settlement. CME's grain FAQ says the exchange averages daily settlement prices over a 45-day period, then multiplies that average by a product percentage. Corn uses 7%. The percentages were chosen so the band would capture ordinary daily moves about 99% of the time.
Those limits reset twice a year, for the first trade date in May and the first trade date in November. The latest reset is Special Executive Report SER-9852, effective for trade date Monday, November 2, 2026, and in force until the first trading day in May 2027.
| Contract | Initial limit per bushel | Expanded limit per bushel | Initial limit per 5,000-bushel contract |
|---|---|---|---|
| Corn (ZC) | $0.35 | $0.55 | $1,750 |
| Soybeans (ZS) | $0.90 | $1.35 | $4,500 |
| Chicago wheat (ZW) | $0.55 | $0.85 | $2,750 |
Corn's initial limit rose from $0.30 to $0.35 in that reset, so a trader still working from the old number would underestimate a full limit day by $250 per contract. Mini-sized grain contracts carry the same per-bushel limits as the standard contracts.
Expanded limits are the second gear. CME says expanded limits apply after any contract month within the first five to eight listed non-spot months settles at the limit, and they stay in place until no futures contract settles at limit. CME describes them as approximately 50% higher; after rounding, corn's $0.55 is about 57% above its $0.35 initial limit. Soybeans, soybean meal and soybean oil expand together, and Chicago wheat and KC wheat expand together.
Equity index price limits
Equity index futures use percentages, not dollar amounts. The reference price is the volume-weighted average price of the lead-month contract between 2:59:30 PM and 3:00 PM CT on the previous trading day.
From 8:30 AM to 2:25 PM CT (9:30 AM to 3:25 PM ET), there are downside limits at 7%, 13% and 20% below that reference. From 2:25 PM to 3:00 PM CT, only the 20% limit applies. Overnight, from 5:00 PM to 8:30 AM CT, and again from 3:00 PM to 4:00 PM CT, there is a hard 7% limit in both directions.
The overnight band also carries a Dynamic Circuit Breaker. If the contract moves more than 3.5% within an hour, trading pauses for two minutes.
Energy and metals price limits
Crude oil, natural gas, gold, copper and most other energy and metals contracts do not use a fixed daily limit. They use Dynamic Circuit Breakers. CME's DCB FAQ explains the build: the exchange multiplies the prior day's settlement by a product percentage to get a variant, then adds and subtracts that variant from the high and low of a rolling 60-minute window.
As of November 4, 2026, CME's price limits page showed variants of about 10% of the prior settlement for crude oil, natural gas and gold. With an illustrative crude settlement of $80.00, the variant would be $8.00. If the last hour's range ran from $79.00 to $81.50, the band would sit at $71.00 and $89.50. Break it and the lead month and all associated months go into a two-minute pre-open state, after which the 60-minute window restarts.
Price Limits Versus Circuit Breakers

Traders use "price limit" and "circuit breaker" as if they mean the same thing. The exchanges do not, and the difference changes what you can do with an open position.
A price limit bands the market. Trading continues at or inside the band. A circuit breaker pauses the market. Orders stop matching for a set time, and the market reopens, sometimes with a wider band.
| Mechanism | What it does | Can you trade during it? |
|---|---|---|
| Daily price limit | Caps how far price can trade from a reference | Yes, at or inside the limit |
| Dynamic circuit breaker | Pauses trading for two minutes after a fast move | No, until the pause ends |
| Market-wide circuit breaker | Halts stocks and index futures after a 7% or 13% S&P 500 drop | No, until the coordinated reopening |
| Locked limit market | Limit reached with orders on one side only | Technically yes, in practice rarely |
The stock market runs its own breakers. Investor.gov explains that market-wide circuit breakers trigger at 7% (Level 1), 13% (Level 2) and 20% (Level 3) declines in the S&P 500, measured from the prior day's close. A Level 1 or Level 2 drop before 3:25 PM ET halts trading for 15 minutes. A Level 3 drop halts trading for the rest of the day.
CME coordinates its equity index futures with those halts. Its FAQ says that after a 7% or 13% regulatory halt, futures tied to the S&P 500, Nasdaq-100, Dow and Russell 2000 resume 10 minutes after the halt began, and a 20% decline ends futures trading for the day as well.
Individual stocks use a separate system called Limit Up-Limit Down. Price bands sit around the stock's average price over the preceding five minutes. If a stock reaches its band and does not move back inside within 15 seconds, trading pauses for five minutes.
Limit Up, Limit Down and Locked Markets
A contract that reaches its limit is not automatically stuck. What matters is whether anyone is still willing to trade on the other side.
When sellers crowd the lower boundary, the market is "limit offered": sell orders are stacked at the limit price and buyers are scarce. When buyers crowd the upper boundary, the market is "limit bid". CME uses exactly these terms in its equity index FAQ.
A locked limit is the extreme case. Price is pinned at the boundary and nearly all interest is on one side. If you are long in a locked limit-down market, there may be no buyer at or above the limit for your contracts. You cannot sell below the limit, because the exchange will not let a trade print there. The result is a position you cannot exit and a loss that is marked at the limit each day it stays locked.
Locked markets also spill into related products:
- Grain and oilseed options carry no price limits, so CME notes they can keep trading while the futures are locked. Their prices then imply where the future might trade without a limit.
- When equity index futures are limit bid or limit offered at the 7% overnight limit, CME moves the associated options into a pre-open state where orders can be entered but do not match.
- Calendar spreads in grains have their own limits, set at twice the outright limit, so a corn calendar spread can move up to $0.70 per bushel.
Keep the two ideas apart. A limit move is a price event. A locked limit is a liquidity event, and liquidity is the one thing you need when you want out.
How Orders Get Filled at a Price Limit
Every futures fill comes from matching a buyer with a seller in the order book. A price limit changes where that matching can happen, not how it works.
In normal conditions, buyers post bids, sellers post offers, and the gap between the best bid and the best offer is the spread. A market buy order takes the best offer; a market sell takes the best bid. Resting limit orders wait in a queue and typically fill by price first, then time: better prices first, and among orders at the same price, the earliest first.
At a price limit, the queue becomes the whole story. Imagine a contract that is limit offered. Every seller who wants out is stacked at the same limit price, in time order, and the matching engine cannot offer them a lower price. A seller who joined the queue late fills only after every earlier seller at that price has been matched against whatever buying shows up.
That is why partial fills are common on limit days. CME's own banding example shows the basic behaviour: a 100-lot market buy order meeting 25 contracts offered at 150.00 fills 25 at 150.00, and the remaining 75 rest as a limit bid at 150.00 instead of chasing price further. At a limit the same logic applies in reverse, but the leftover quantity may sit for the rest of the session.
Two practical points follow:
- Being first in line matters more than price at a limit, because every order in the queue has the same price.
- A partial fill is not a failure of your platform. It is the order book telling you how much liquidity actually exists at the boundary.
Related lesson: Why stops can fill far from their price
Market Orders Versus Limit Orders When a Market Is Locked
Market orders and limit orders trade speed against price control. Investor.gov puts it simply: a market order prioritises execution but not price, while a limit order sets the worst price you will accept.
Near a price limit, that tradeoff changes shape.
| Situation | Market order | Limit order |
|---|---|---|
| Normal two-sided market | Fills quickly at the best available price | Fills only at your price or better |
| Fast market approaching a limit | Fills, possibly far from the last trade | May be skipped if price jumps past it |
| Locked market on your side | Joins the queue at the limit price, may not fill | Joins the queue, may not fill |
| Price outside the exchange band | Matches only within the band | Rejected if priced beyond the limit |
The last row surprises traders. CME's equity index FAQ says an offer entered below the prevailing down limit is rejected. If the 7% limit is in force, an order to sell below it will not be accepted. The same order can be accepted once the limit expands to 13%, provided it is above the new boundary.
So when a market is locked, neither order type rescues you. A market order cannot trade beyond the limit, and a limit order priced beyond the limit is refused. What you can control is size and timing before the move, not order type during it.
Stop Orders and Stop-Limit Orders Near a Price Limit
A stop order is a resting instruction that wakes up when price reaches a trigger. FINRA Rule 5350 and the SEC's investor bulletin describe it the same way: a sell stop becomes a market order once the stop price is reached. Traders use stops to cap losses on open positions, to protect open profit, and sometimes to enter on a breakout.
A stop-limit order works differently. Once triggered, it becomes a limit order at the price you set. It gives you price control, but the SEC bulletin is explicit that it may not execute at all if price moves away from your limit.
On CME Globex, the stop you place through a broker usually becomes one of two exchange order types. A stop-limit goes on the book as a limit order. A stop with protection enters as a market order but carries a protection price, so any part that cannot fill inside that range rests on the book at the protection price instead of chasing further.
Now add a price limit. If corn is locked limit down and your sell stop sits above the market, the stop triggers as soon as price trades through it. It then becomes a sell order at, or in the queue for, the limit price, behind every other seller who got there first. It may fill partially, or not at all, until buyers return.
That is what "a stop is a plan, not a guarantee" means in practice. Your stop decides when you want out. The order book and the exchange band decide whether you actually get out.
Choosing between a stop and a stop-limit near a limit
A stop-limit can stop you from being filled at a terrible price, but it can also leave you holding the position you were trying to close. Near a limit, ask which outcome is worse for this trade.
- If the priority is getting flat, a stop (or stop with protection) gives you the best chance of a fill once liquidity appears.
- If the priority is avoiding a fill far from your planned price, a stop-limit caps the price, at the cost of possibly no fill.
- In either case, the honest fix sits upstream: position size small enough that a limit day does not decide your account for you.
Related lesson: How stop orders trigger and fill
Price Gaps Through a Price Limit
A price gap is a jump from one traded price to the next with no trades in between. Gaps appear most often at session opens, after scheduled reports and after weekend news. A price limit does not prevent a gap; it only sets how far the gap can run in one session.
Gaps hit orders in different ways:
- A stop or stop-market order triggered by a gap fills at the first available price after the gap, which can be far beyond the stop price.
- A stop-limit triggered by a gap may not fill at all if the gap lands beyond its limit price.
- A resting limit order on the right side of the gap can fill at a better price than intended; on the wrong side it is simply skipped.
For equity index futures, the overnight 7% band tells you the worst place a gap can travel before the band stops it. With an illustrative reference price of 6,000, 7% is 420 points, so the overnight band runs from 5,580 to 6,420. On one E-mini S&P 500 contract at $50 per point, 420 points is $21,000. The 3.5% Dynamic Circuit Breaker adds a two-minute pause after a 210-point move within an hour, but a pause is a breather, not a refund.
Order types reduce gap damage at the edges; they do not remove it. The protections that actually work are smaller size, fewer positions held into known event windows, and knowing exactly where the adverse limit sits before you enter.
Related lesson: How opening gaps form and get filled
Order Duration and Session Timing Around Price Limits
How long an order lives, and when the market is open, both change how a price limit affects your position.
Day orders expire at the end of the session. Good-till-cancelled (GTC) and good-till-date (GTD) orders persist across sessions. CME's Globex documentation adds a detail most traders never meet: in most products, a GTC or GTD order can be entered outside the day's price limits. Once accepted, it is not actionable until a later session's band moves to include its price. Large equity index products are the exception.
Session hours matter because limits are tied to sessions. Corn trades on CME Globex from 7:00 PM to 7:45 AM CT and from 8:30 AM to 1:20 PM CT, and its limit is measured from the prior settlement. A limit-down settlement on one day changes the band and can trigger expanded limits the next. Equity index futures switch between the 7% overnight band and the 7%, 13% and 20% daytime tiers, so the same position faces a different rule at 3:00 AM CT than at 10:00 AM CT.
Expiry changes the rules again. Under SER-9852, CBOT grain and oilseed futures have no price limits on the current-month contract from the second business day before the first day of the delivery month. CME's documentation says limits are removed then so settlement prices can converge with the physical commodity. A trader still holding an expiring grain month can face an unlimited move just when the market is thinnest.
Worked Limit Move Examples in Corn and Stock Index Futures
These worked limit move examples show what a limit does to a real position size. The corn and Micro E-mini S&P 500 examples use published contract specifications and current exchange limits with illustrative prices. The third example is the actual March 2020 sequence in S&P 500 futures and stocks.
Corn limit cascade over four days
Corn futures cover 5,000 bushels, and the minimum tick is a quarter cent, worth $12.50. The initial limit is $0.35 per bushel ($1,750 per contract), and the expanded limit is $0.55 ($2,750 per contract).
Imagine a trader long two contracts at an illustrative $4.60, with a stop at $4.28. The planned loss is $0.32 per bushel, $1,600 per contract, or $3,200 on two contracts.
- Day 1: corn settles at $4.50. The next session's band is $4.15 to $4.85.
- Day 2: the market sells off and settles locked limit down at $4.15. The stop triggers but joins a queue of sellers at the limit with few buyers, and it does not fill.
- Day 3: expanded limits apply, so the band is $3.60 to $4.70. Corn locks limit down again at $3.60.
- Day 4: expanded limits stay in force because the market settled at limit again, giving a band of $3.05 to $4.15. Corn finally trades off the limit and the trader exits at an illustrative $3.40.
| Stage | Price | Loss per contract | Loss on two contracts |
|---|---|---|---|
| Planned stop | $4.28 | $1,600 | $3,200 |
| Day 2, locked at the limit | $4.15 | $2,250 | $4,500 |
| Day 3, locked at the expanded limit | $3.60 | $5,000 | $10,000 |
| Day 4, exit after the lock breaks | $3.40 | $6,000 | $12,000 |
Nothing about the analysis changed between the first row and the last. The trader had a stop and a size that fit the plan. The extra $8,800 came from a market that could not trade, and the final loss was 3.75 times the planned one. That is why limit-prone products deserve sizing for two or three bad sessions, not one.
Micro E-mini S&P 500 overnight gap
Micro E-mini S&P 500 futures (MES) are worth $5 per index point, with a 0.25-point tick worth $1.25. Assume an illustrative 3:00 PM CT reference and index level of 6,000, so the overnight 7% limit is 5,580.
Imagine a trader long ten MES at 5,900 with a stop at 5,850. The planned loss is 50 points, $250 per contract, or $2,500 on ten.
Overnight news hits and the market gaps straight to the 5,580 limit. That is 320 points below entry: $1,600 per contract and $16,000 on ten. On a $50,000 account, one gap costs 32% of the balance, 6.4 times the planned loss. The band capped the move. It did not cap the loss.
March 2020 limit-down mornings
The March 2020 sell-off shows the system working under real stress. A working group report produced by the stock exchanges and FINRA at the SEC's request records the sequence.
- E-mini S&P 500 futures reached limit down overnight into March 9, March 12 and March 16, 2020. The overnight limit was 5% then; CME's current FAQ sets it at 7%.
- The S&P 500 then triggered Level 1 market-wide halts at 9:34:13 AM on March 9, 9:35:44 AM on March 12 and 9:30:01 AM on March 16, plus a fourth at 12:56:17 PM on March 18.
- The index closed those days down 7.6%, 9.5%, 12% and 5.2% respectively.
The working group concluded the halts worked as intended. For traders, the takeaway is narrower: the limit-down events came overnight, before the cash market opened, which is exactly when many traders were not watching.
Price Limits in Execution Algorithms
"Price limit" also has a second meaning in execution. A trader running an algorithm, such as one that slices a large order over time, can attach a limit price so the algorithm never pays more (or sells for less) than a chosen level. That cap protects against buying into a spike, at the cost of possibly finishing the day only partly filled.
Exchange price limits sit on top of whatever the algorithm wants. Several CME rules shape automated execution:
- Orders priced beyond the prevailing limit are rejected, so an algorithm that reprices aggressively during a fast move can see a run of rejections rather than fills.
- CME Globex price banding rejects buy orders too far above the last price and sell orders too far below it. Price limits and circuit breakers take precedence over banding.
- When a Dynamic Circuit Breaker fires, the lead month and related months move to a two-minute pre-open. Orders can be entered and cancelled but do not match, so an algorithm must handle a market that is open for messages but closed for trades.
- GTC and GTD orders entered outside the daily limit rest until a later band includes them, which can surprise a system that assumes every accepted order is live.
The practical rule for anyone automating trades is to treat a limit condition as a state to detect, not an error to retry through. A loop that keeps resubmitting into a locked market adds noise and risk without adding fills.
Pros and Cons of Price Limits
The pros and cons of price limits come down to one exchange: the market gets time, and individual traders lose the ability to exit.
The case for limits rests on time. A band that stops a market from moving further in one session gives participants a chance to absorb news and meet margin calls. It also helps a market stay orderly instead of overshooting in one burst. The March 2020 working group report found the market-wide halts had the intended calming effect without causing harm.
The case against limits rests on what they do to positions:
- Trapped positions. A locked limit market can leave a trader unable to exit for one or more sessions, as the corn cascade example shows.
- Deferred volatility. If fair value has moved further than the limit, the limit delays the adjustment rather than preventing it. The next session often opens at or near a new limit.
- Reduced liquidity. With one side of the book empty, the limit price is a quote with almost nobody behind it.
- Convergence problems. CME's own documentation says limits could inhibit futures from converging with the physical market near expiry, which is why grain limits come off before delivery.
Both sides have a point. Limits protect the market as a whole, while the cost lands on whoever is holding the wrong side when the band locks. As a trader you cannot change the rule, so the useful question is whether your position can survive it.
Who Needs to Watch Exchange Limits Most
Exchange limits do not affect every trader equally, and each type of trader leans on different orders. The ones who should pay closest attention are:
- Grain and livestock traders. These markets carry fixed daily limits, and scheduled government reports can move them to the limit in one session. They often hold positions for days, so they rely on resting stops and should plan for expanded limits.
- Overnight equity index traders. The 7% overnight band and 3.5% Dynamic Circuit Breaker define the worst case for anyone holding through the Globex night session. Momentum traders who buy breakouts with stop entries can be filled right into a fast move toward that band.
- Hedgers. A farmer or processor who is hedged in futures can be locked out of adjusting the hedge just when the cash market is moving.
- Part-time traders. Anyone who cannot watch the screen relies on resting stops and bracket orders. Those stops are the orders most exposed when a market locks, because nobody is there to decide whether to hold or cut size.
- New traders. First-year traders often size from the stop distance alone and have never seen a contract fail to trade. Many default to market orders for speed without knowing those orders cannot fill beyond the limit.
- Day traders in index and energy futures. Intraday limits are wide, but Dynamic Circuit Breaker pauses and market-wide halts can still freeze an open position for minutes at a time. Risk-conscious day traders use limit entries and stop-limit exits to control price, and accept that some orders will not fill.
Whatever the style, the question is the same: if this market locked against me right now, which of my orders would still help, and how big would the loss be?
Common Limit Move Mistakes in Volatile Markets
Volatile markets punish the same handful of limit move mistakes over and over. Each one comes from a reasonable assumption that fails only on the worst day.
| Mistake | What it looks like | What prevents it |
|---|---|---|
| Sizing for one limit day | A stop that only survives one session | Assume two or three limit sessions in products that have already settled at limit |
| Treating a stop as a guarantee | Stop at $4.28, no fill until $3.40 | Check the adverse limit before entry and size to it |
| Using a stale limit number | Planning with corn at $0.30 after the reset to $0.35 | Read the current exchange table before each new position |
| Assuming every market halts | Waiting for a pause that the product never uses | Learn whether the contract uses fixed limits, percentage tiers or dynamic breakers |
| Placing unrealistic limit prices | Entering an order beyond the limit and getting rejected | Price orders inside the current band |
| Stops placed too close in a fast market | Normal noise triggers the stop just before a limit day | Widen the stop and cut size, rather than tightening the stop to fit size |
The pattern behind all of them is the same. A limit day turns a sizing decision into an outcome the trader did not choose. It is tempting to look for a smarter order type. The fix is almost always fewer contracts.
A Pre-Trade Price Limit Check

Run this price limit check before entering a position, not after a market locks.
- Find the current limit for your contract on the exchange's price limits page.
- Identify the reference price: prior settlement for grains, the 3:00 PM CT VWAP for index futures, or the rolling window for dynamic breakers.
- Write down both limit prices for the session you will hold through.
- Measure the distance from entry to the adverse limit and multiply by the contract's point value and your size.
- Compare that dollar figure with your daily loss limit and your account's maximum drawdown. If it breaches either, cut size.
- Note any scheduled reports or session breaks that fall while you hold the position.
- Decide in advance what you will do if the market locks. Holding through an expanded limit should be a choice you made calmly, not one the market made for you.
Smaller contracts, platforms and practice
Smaller contracts make a price limit check easier to pass. Micro equity index contracts are one-tenth the size of the E-mini, so a band that would take a large share of an account on one E-mini may fit on a few micros. In grains, mini-sized contracts carry the same per-bushel limits as the standard ones but on fewer bushels. Commissions are usually charged per contract, so splitting one position into many micros multiplies the per-contract fee; check your fee schedule before you split size.
Platform details matter too. Check whether your platform shows the day's limit prices on the DOM or quote panel, and whether your stops sit on the broker's server or on your own computer. During a CME pre-open after a pause, orders can usually be entered, changed or cancelled even though nothing matches, so you can still adjust a working order. Practising in a simulator lets you see a limit price, a rejection and a partial fill before real money is at stake.
Related lesson: The unit that every limit calculation rests on
On our accounts, the trading day runs from 6:00 PM to 5:00 PM ET, and every position must be closed by 4:45 PM ET, so nothing is held from one trading day into the next. Within a session, though, the overnight band can still matter. Our end-of-day trailing drawdown is enforced in real time on net liquidation value, so a position frozen at a limit is still marked against it. CME halts stop trading on every platform, and we do not compensate losses during them.
Price Limits and Limit Moves FAQ
Does a limit move stop trading?
Not by itself. The market can keep trading at the limit price but not beyond it. Trading pauses only when a circuit breaker, a Dynamic Circuit Breaker or a coordinated market-wide halt applies.
What does locked limit mean?
Locked limit means price sits at the limit with orders on only one side. In a locked limit-down market there are sellers at the limit and almost no buyers, so a long position may not be exitable until the lock breaks.
What does limit mean in stocks?
In stocks, "limit" usually refers to a limit order, which sets the worst price you will accept. It can also mean the Limit Up-Limit Down bands, which pause a stock for five minutes if it stays at its band for 15 seconds.
What is a market order in trading?
A market order buys or sells at the best price available right now. It prioritises getting filled over the exact price. In futures, it cannot trade beyond the exchange's price limit.
What is a stop-loss order in trading?
A stop-loss order is a resting order that becomes a market order when price reaches your stop level. It is meant to cap a loss on an open position. In a fast or locked market it can fill far from the stop price, or not fill at all.
Are all contract months subject to price limits?
No. CBOT grain and oilseed futures drop their limits on the current-month contract from the second business day before the delivery month begins. Grain options carry no price limits at all.
Why do price limits change?
Grain limits reset twice a year from recent average prices, so they rise when prices are high and fall when prices drop. Equity index limits recalculate daily from the prior session's reference price. Dynamic breakers recalculate from the prior settlement every day.
Know Your Price Limit Before You Enter
Before your next trade in a limit-prone contract, open the exchange's price limits page and write down two numbers: the adverse limit for the session you will hold through, and the dollar loss that limit would produce at your normal size. If that loss is larger than your daily loss limit or sits close to your account's drawdown, reduce size before you enter. Your stop is the plan, and the limit is the worst case the exchange allows in that session.
Trading futures involves substantial risk of loss and is not suitable for everyone. Leverage means a limit move can produce losses far larger than a planned stop, and a locked market may prevent you from exiting. Simulated and funded evaluation accounts are simulated, and their results do not reflect live market fills. This article is education, not financial advice.

