TL;DR: Futures trading hours on CME Globex run Sunday 6:00 PM to Friday 5:00 PM ET, with a one-hour break from 5:00 PM to 6:00 PM ET. The market is open about 23 hours a day, but most volume arrives between 9:00 AM and 4:00 PM ET. The daily break barely moves price, while the weekend closure can gap price several times further.
Futures trading hours look simple on paper: Sunday evening to Friday afternoon, Eastern Time, with a short pause each weekday. The trouble starts at the edges. A stop you set at 4:50 PM, a setup that shows up at 1:00 AM, a position you are tempted to carry into Sunday night. Each of those is a decision the clock makes for you if you have not made it first.
This guide covers the session times by product, what the daily maintenance window actually does, the weekend closure, and a measurement of where volume and price movement really sit across the trading day on E-mini S&P 500 futures.
Futures Trading Hours by Product Group
Futures hours are set per product by the exchange, not by your broker. For the CME Group products most retail traders use, the electronic session on CME Globex follows one of three shapes: nearly 23 hours a day, a split overnight and day session, or a day session only.
| Product group | Example contracts | CME Globex hours (ET) | Same hours (CT) |
|---|---|---|---|
| Equity index | ES, NQ, MES, MNQ | Sunday to Friday, 6:00 PM to 5:00 PM, daily break 5:00 PM to 6:00 PM | 5:00 PM to 4:00 PM, break 4:00 PM to 5:00 PM |
| Energy | CL, NG | Sunday to Friday, 6:00 PM to 5:00 PM, 60-minute break from 5:00 PM | 5:00 PM to 4:00 PM, break from 4:00 PM |
| Metals | GC | Sunday to Friday, 6:00 PM to 5:00 PM, 60-minute break from 5:00 PM | 5:00 PM to 4:00 PM, break from 4:00 PM |
| Currencies | 6E | Sunday to Friday, 6:00 PM to 5:00 PM, 60-minute break from 5:00 PM | 5:00 PM to 4:00 PM, break from 4:00 PM |
| Interest rates | ZN | Sunday to Friday, 6:00 PM to 5:00 PM, 60-minute break from 5:00 PM | 5:00 PM to 4:00 PM, break from 4:00 PM |
| Grains | ZC, ZS | Sunday to Friday 8:00 PM to 8:45 AM, then Monday to Friday 9:30 AM to 2:20 PM | 7:00 PM to 7:45 AM, then 8:30 AM to 1:20 PM |
| Livestock | LE, HE | Monday to Friday 9:30 AM to 2:05 PM | 8:30 AM to 1:05 PM |
CME publishes its hours in Central Time because the exchange is in Chicago. Eastern Time is one hour ahead all year, since both zones change their clocks on the same dates.
Learn the exceptions before they cost you. Corn and soybeans pause from 8:45 AM to 9:30 AM ET and close for the day at 2:20 PM ET. Live cattle and lean hogs trade only in a daytime window. A routine built around the equity index session will quietly mislead you on either of those markets.
Related lesson: Futures Contract Specifications
How the Futures Trading Day Runs From 6 PM to 5 PM

A futures trading day is not a calendar day. It starts in the evening and ends the following afternoon. A trade placed at 8:00 PM ET on Tuesday belongs to Wednesday's trade date, because the session that opened at 6:00 PM Tuesday settles on Wednesday.
CME's own market-state documentation shows this switch. The pre-open before each new session rolls the trade date forward and resets the session statistics, so the high, low and volume figures on your platform start over at the evening reopen. If your daily high suddenly looks wrong at 6:00 PM, that reset is usually why.
The overnight futures session in windows
The overnight electronic session is one continuous market, but it behaves like several smaller ones as different regions come online. Using Eastern Time and the E-mini S&P 500 as the reference:
- 6:00 PM to 8:00 PM ET, the evening reopen. Volume is at its lowest point of the day as the new trade date starts.
- 8:00 PM to 3:00 AM ET, Asian trading hours. Activity picks up when Asian equity markets open, then settles again.
- 3:00 AM to 9:00 AM ET, European hours and the US morning. Volume builds as London opens and again ahead of US economic data at 8:30 AM ET.
- 9:00 AM to 4:00 PM ET, the US stock market session. This window contains the 9:30 AM ET stock open and the 4:00 PM ET stock close.
- 4:00 PM to 5:00 PM ET, the post-close hour before the daily break.
These windows are labels, not exchange rules. They are useful because each one tends to carry a different volume and range profile, and the measurements in the volume and volatility sections of this guide put numbers on that.
Regular Trading Hours Versus Extended Futures Hours
Regular trading hours, or RTH, is a label borrowed from the stock market. For equity index futures it usually means the 9:30 AM to 4:00 PM ET window when the NYSE core session is open. Everything else in the 23-hour session is called extended trading hours, or ETH, sometimes "overnight" or "Globex hours".
The exchange does not run two separate markets. ES traded at 2:00 AM is the same contract, cleared the same way, as ES traded at 10:00 AM. What changes is who is trading and how much size is resting in the book, and that is the part that decides whether your order fills where you expected.
The distinction matters most on charts. Many platforms let you choose a session template: RTH only or the full electronic session. That choice changes the daily open, high, low and close, the overnight gap you see at 9:30 AM, and any indicator that resets each session, such as a session VWAP. Two traders looking at "the same" daily chart can see different levels if one uses RTH and the other uses the full session.
For grain and livestock futures, the day session (9:30 AM to 2:20 PM ET for grains, 9:30 AM to 2:05 PM ET for livestock) plays the role of regular hours.
Related lesson: Regular Trading Hours vs. Extended Trading Hours in Futures
The Daily Futures Maintenance Window From 5 PM to 6 PM ET

The daily maintenance window is the hour from 5:00 PM to 6:00 PM ET (4:00 PM to 5:00 PM CT) when CME Globex stops matching orders for most products. It is a scheduled part of every weekday session, not an outage, and it is the boundary between one trade date and the next.
What happens to orders in the maintenance window
CME's market-state documentation describes the sequence:
- At the 5:00 PM ET close, the market enters a final close state for that trade date. Day orders are eliminated at this point.
- Good-till-cancelled (GTC) and good-till-date (GTD) orders stay in the book. During the post-close state they can be placed, modified or cancelled, but nothing matches.
- Shortly before the reopen, the pre-open begins. Orders can be entered, modified and cancelled, but market orders, fill-and-kill and fill-or-kill orders are not accepted, and there is still no matching.
- About 30 seconds before the reopen, a no-cancel period starts. New orders are accepted, but existing ones cannot be modified or cancelled.
- At 6:00 PM ET the market opens at an indicative opening price calculated from the orders waiting in the book, and continuous trading resumes.
The practical consequence cuts both ways. A day order you forgot about is gone after 5:00 PM ET, while a GTC stop stays live into the next session. If your platform defaults to GTC, a stale order from this afternoon can fill at the 6:00 PM reopen while you are eating dinner.
Daily settlement and clearing around the break
Daily settlement happens close to the end of each product's day session, not in the break itself. For US equity index futures, CME uses the volume-weighted average price of the lead contract between 2:59:30 PM and 3:00 PM CT (3:59:30 PM to 4:00 PM ET) as the reference price for its daily price limits.
After the close, CME Clearing runs its end-of-day cycle: settlement prices are published, gains and losses are moved between accounts through settlement variation, and initial margin requirements are recalculated. A position you hold through the break is marked to the new settlement price, and the margin your broker requires for the next session can change.
Related lesson: Mark-to-Market in Futures
How much price moves across the daily break
Because the market is closed for an hour, price can only jump between the last trade before 5:00 PM and the reopen at 6:00 PM. To measure how big that jump usually is, this study compares the close of the 4:00 PM ET hourly bar with the open of the 6:00 PM ET hourly bar on E-mini S&P 500 futures.
The sample is Yahoo Finance's continuous ES front-month hourly series from June 14, 2024 through the November 4, 2026 session. It uses Monday to Thursday breaks only, and leaves out the 14 days before each quarterly expiry, where a continuous series can switch contracts and print a false gap. That leaves 398 breaks.
In that Yahoo Finance ES sample, the median move across the break was 1.25 index points. The 90th percentile was 6.25 points, only 5.03% of breaks moved 10 points or more, and 1.01% moved 25 points or more. The 5:00 PM hour itself produced just 10 hourly records in the whole sample, none above 61 contracts, which is what a closed market should look like.
Weekend Futures Hours and the Sunday Open

CME futures do not trade on weekends. Most products close Friday at 5:00 PM ET and reopen Sunday at 6:00 PM ET, a 49-hour closure. Grains reopen later, on Sunday at 8:00 PM ET, and livestock does not trade again until Monday's day session.
Is the futures market open on weekends
No regular CME futures session runs on Saturday. Orders you enter through a broker over the weekend wait until the Sunday pre-open, if the broker accepts them at all. Any news that breaks on Saturday or Sunday is priced in a single step when the market reopens.
What happens at the Sunday open
Sunday's reopen follows the same pre-open sequence as a weekday: order entry opens shortly before the session, the book builds, and the first trade prints at an opening price set from those waiting orders. Sunday's session belongs to Monday's trade date.
It is also one of the thinnest hours of the week. In Yahoo Finance's ES hourly series from June 14, 2024 to November 4, 2026, the median Sunday 6:00 PM ET hour traded 10,476 contracts, against a median of 54,385 contracts in the Friday 4:00 PM ET hour, across 117 weekends each.
Weekend gaps compared with the daily break
The weekend gap is where the clock creates real price risk. The table compares two closures in Yahoo Finance's ES hourly series from June 14, 2024 to November 4, 2026. The break gap is the 4:00 PM ET hourly close against the 6:00 PM ET hourly open, Monday to Thursday. The weekend gap is the Friday 4:00 PM ET hourly close against the Sunday 6:00 PM ET hourly open. Both leave out the 14 days before each quarterly expiry, where the continuous series switches contracts.
| Measure (ES, index points) | Daily break, Monday to Thursday | Weekend, Friday to Sunday |
|---|---|---|
| Closures measured | 398 | 83 |
| Median absolute gap | 1.25 | 9.75 |
| 90th percentile gap | 6.25 | 45.5 |
| Share of gaps of 25 points or more | 1.01% | 22.89% |
| Largest gap in the sample | 65.25 | 89.75 |
The median weekend gap was close to eight times the median break gap. That gap in risk has a plain cause. The daily break is one quiet hour with no scheduled news. The weekend is two days of headlines with no market to absorb them, and all of it gets priced in the first minutes of Sunday night.
Volume and Liquidity Across Futures Trading Hours
Published schedules tell you when futures are open. They do not tell you when the market is liquid enough to trade the way you plan to. To put a number on that, Yahoo Finance's continuous ES hourly series from June 14, 2024 to November 4, 2026 was split into five session windows (6:00 PM to 8:00 PM, 8:00 PM to 3:00 AM, 3:00 AM to 9:00 AM, 9:00 AM to 4:00 PM and 4:00 PM to 5:00 PM ET), and each window's share of volume was compared with its share of the 23 open hours. Only complete 23-hour sessions are used, 555 in total.
| ES session window (ET) | Share of open hours | Share of volume | Volume per hour vs average | Median hourly range (points) |
|---|---|---|---|---|
| 6:00 PM to 8:00 PM | 8.7% | 0.75% | 0.09 | 9.0 |
| 8:00 PM to 3:00 AM | 30.43% | 3.93% | 0.13 | 7.5 |
| 3:00 AM to 9:00 AM | 26.09% | 8.66% | 0.33 | 10.75 |
| 9:00 AM to 4:00 PM | 30.43% | 82.54% | 2.71 | 20.0 |
| 4:00 PM to 5:00 PM | 4.35% | 4.13% | 0.95 | 9.5 |
Read the ratio column first. A value of 1.00 would mean volume arrives in proportion to time. The 9:00 AM to 4:00 PM window runs at 2.71, so it trades almost three times its share of the clock. The evening reopen runs at 0.09.
In that ES sample, the busiest single hours were the 10:00 AM ET hour at 16.12% of all volume, the 3:00 PM ET hour at 15.98%, and the 9:00 AM ET hour at 12.39%. The quietest was the 6:00 PM ET reopen hour at 0.2%.
What thin liquidity does to your fills
Volume is a proxy for how much size sits in the order book. When fewer contracts trade, fewer orders rest near the best bid and offer. The spread is more likely to widen, a market order is more likely to fill at several prices, and a stop is more likely to slip past its trigger.
None of that makes the overnight session untradeable. It means the same order size has a larger footprint at 11:00 PM than at 10:00 AM, and a plan that assumes RTH fills will quietly cost more overnight. Most traders only notice it when they compare their fills with their planned prices in a journal.
Related lesson: What Is Liquidity?
How Volatility Changes Across Futures Sessions
Price movement follows volume closely. In Yahoo Finance's ES hourly series from June 14, 2024 to November 4, 2026, the median hourly high-to-low range in the 9:00 AM to 4:00 PM ET window was 20.0 points, against 7.5 points between 8:00 PM and 3:00 AM ET.
Two hours stand out inside the day. The 10:00 AM ET hour had the largest median range at 27.25 points, and the 9:00 AM ET hour, which contains the stock open, had 25.75. Before the open, the 8:00 AM ET hour had a median range of 14.25 points against 10.75 for the 7:00 AM hour, the step up that 8:30 AM ET economic data tends to produce.
Do not read a low overnight median as safety, though. A single headline can move a thin book further than the same headline would during RTH, because there is less resting size to absorb it. Low average volatility and low tail risk are not the same thing.
Related lesson: What Is Volatility?
Best Times to Trade Futures
The best time to trade futures is the window where your setup actually occurs and the market is liquid enough to fill you at the price you planned. For equity index futures, the measurements point to the first two hours after the 9:30 AM ET stock open and the final hour before the 4:00 PM ET stock close.
A few practical rules follow from the data:
- If your method relies on momentum and tight stops, the 9:00 AM to 11:00 AM ET stretch gives it the most volume and range to work with.
- If you trade reversals at prior levels, the late session around 3:00 PM ET carries heavy volume as positions are squared before the stock close.
- The midday hours still trade, but the median range falls from 27.25 points in the 10:00 AM hour to 18.0 in the 12:00 PM hour, so targets sized for the morning may not be reached.
- For grains and livestock, the only liquid window is the day session that opens at 9:30 AM ET.
Doing nothing is a legitimate choice. If your setup appears at 1:00 AM in a market trading at a fraction of its daytime volume, the urge to take it anyway is understandable, especially after waiting all evening. Skipping it is often the better trade than accepting a fill you would never accept in RTH.
Related lesson: Global Trading Sessions
Adjusting Strategy and Size to the Futures Session
The session you trade should change your size, your stop distance and your order types, not just your hours.
Gap risk in dollars on ES and MES
Imagine a trader long one E-mini S&P 500 contract with a 20-point stop, an illustrative example rather than a recommendation. ES is worth $50 per index point, so the stop represents $1,000 of planned risk. The same trade on the Micro E-mini S&P 500 (MES), at $5 per point, risks $100.
Now apply the gaps measured on Yahoo Finance's ES hourly series (June 14, 2024 to November 4, 2026, expiry weeks excluded):
- Across the daily break, the median 1.25-point move is $62.50 on one ES contract. The 90th percentile, 6.25 points, is $312.50.
- Across the weekend, the median 9.75-point gap is $487.50 on one ES contract, nearly half the planned risk before the market even opens. The 90th percentile, 45.5 points, is $2,275, more than twice the planned risk.
- On one MES contract, the same weekend figures are $48.75 at the median and $227.50 at the 90th percentile.
A stop does not protect you from a gap. A resting stop becomes a market order once price trades through it, so if Sunday opens beyond your stop, you are filled at or near the open, not at your level.
Session habits for overnight and weekend risk
- Size down overnight. Thin books magnify slippage, so a smaller position is the honest response to lower liquidity.
- Prefer limit orders when the spread is wide, and avoid market orders in the minutes after the reopen.
- Check which orders are GTC before 5:00 PM ET, so nothing you forgot can fill at the next open.
- Decide before Friday afternoon whether a position is coming home with you for the weekend, not at 4:58 PM when the decision is made by hope. If the 90th percentile weekend gap would break your risk plan, it is too big to hold.
Related lesson: Position Sizing Futures Contracts
News and Global Events Outside Regular Futures Hours
Because futures trade while stocks are closed, they are where the first reaction to overnight news shows up. Earnings released after the 4:00 PM ET stock close, central bank decisions in Asia and Europe, and geopolitical headlines all hit futures prices hours before the next stock open.
The biggest scheduled US events land just before RTH. The Bureau of Labor Statistics releases the Consumer Price Index at 8:30 AM ET, an hour before the stock open, and futures react immediately while stocks are still closed. That is the reason the 8:00 AM ET hour in the ES sample has a wider median range than the hours around it.
CME also limits how far equity index futures can move outside US hours. From 6:00 PM to 9:30 AM ET (5:00 PM to 8:30 AM CT), US equity index futures have a hard upside and downside limit of 7% from the prior reference price, and dynamic circuit breakers with a width of 3.5% pause trading for two minutes if the market moves beyond that within an hour. These limits cap the most extreme overnight moves but do nothing for an ordinary 1% gap.
Converting Futures Hours to Your Time Zone
The exchange sets its hours in Chicago time, so the US clock changes move the session for everyone else. US daylight saving time ended on November 1, 2026 and starts again on March 14, 2027. The UK changed its clocks on October 25, 2026 and changes again on March 28, 2027.
| Period | Break starts (ET) | Central Time | UTC | London |
|---|---|---|---|---|
| US and UK both on standard time, November 1, 2026 to March 14, 2027 | 5:00 PM | 4:00 PM | 22:00 | 10:00 PM |
| US on daylight time, UK not yet, March 14 to March 28, 2027 | 5:00 PM | 4:00 PM | 21:00 | 9:00 PM |
| US and UK both on daylight time, late March to late October | 5:00 PM | 4:00 PM | 21:00 | 10:00 PM |
The reopen is always one hour after the break starts. On the US West Coast the break runs 2:00 PM to 3:00 PM PT all year.
The mismatch weeks are what catch people. Twice a year, for one to three weeks, the break lands an hour earlier for traders in the UK and Europe. If your routine is built on local clock times, those are the weeks you close too late or start too early, so put both clock-change dates in your calendar.
Holiday and Early Close Futures Hours
US holidays change futures hours, and the changes differ by product group. On a typical holiday, CME either closes a product for the day, halts it early and reopens it in the evening for the next trade date, or runs a shortened session.
CME's 2026 schedule lists holiday windows for Thanksgiving from November 26 to 28, Christmas from December 24 to 26, and New Year's from December 31, 2026 to January 1, 2027. CME notes that holiday trading hours are usually finalized about two weeks before each holiday, so check the exact times for your product closer to the date.
The stock market schedule is a useful cross-check. The NYSE is closed on Thanksgiving, November 26, 2026, and closes early at 1:00 PM ET on Friday, November 27, 2026 and on Thursday, December 24, 2026. Equity index futures usually shorten their own sessions on those days. In the ES sample, the last hourly bar on the day after Thanksgiving and on Christmas Eve in both 2024 and 2025 started at 1:00 PM ET, three hours earlier than normal.
Holiday sessions are thin and short. If you plan to trade one, confirm the close time for your product, and do not hold a position into a close that comes earlier than your routine expects.
Platforms, Data and Orders Around Futures Hours
Your tools have their own relationship with the session clock, and most surprises around the break come from a setting you never checked, not from the market.
- Session templates. Check whether your charts use the full electronic session or RTH only. It changes daily bars, gaps and any indicator that resets each session.
- Order duration. Day orders expire at the 5:00 PM ET close. GTC orders survive the break and the weekend. Know which one your platform uses by default.
- Where stops live. Some platforms hold stop and bracket orders on the broker's or exchange's servers, while others trigger them from your computer. A stop that lives on your machine does nothing if your platform is closed at the reopen.
- Data feed timing. Delayed or snapshot data makes the reopen and the stock open look smoother than they are. Real-time data matters most in the minutes when price moves fastest.
- Platform clock. Set your platform's time zone deliberately. Charts that show exchange time and a calendar that shows local time are a common source of missed releases.
Related lesson: Stop-Loss Orders and Placement
Account Rules That Shorten Your Futures Hours
The exchange schedule is the outer limit. Brokers and prop firms can set earlier cutoffs, such as a deadline to be flat before the daily close or a ban on holding over the weekend. Those account rules, not the exchange clock, decide your real trading window.
On our accounts, the trading day follows CME hours, 6:00 PM to 5:00 PM ET, and every position must be closed by 4:45 PM ET, or 12:59 PM ET on holiday early closes. No account, Live included, can hold through the daily maintenance window or over the weekend, so break and weekend gaps never apply to an open position on our accounts. You can still hold a trade for the whole session, for example from 8:00 PM Monday to 2:00 PM Tuesday. Anything left open at the close is closed automatically without failing the account, though the fill may be worse than planned. Our holiday hours are posted in our Discord. One consequence of combining these rules with CME's grain hours: corn and soybeans stop trading for the day at 2:20 PM ET, and their next session starts that evening, so a grain position has to be flat by its own 2:20 PM ET close rather than by 4:45 PM ET. Our funded accounts are simulated.
Common Questions About Futures Hours
What are futures trading hours in Eastern Time?
Most CME futures trade from Sunday 6:00 PM ET to Friday 5:00 PM ET, with a daily break from 5:00 PM to 6:00 PM ET. Grains trade 8:00 PM to 8:45 AM ET and 9:30 AM to 2:20 PM ET. Livestock trades only 9:30 AM to 2:05 PM ET.
Do futures trade 24 hours a day?
Not quite. Most CME futures trade about 23 hours a day, five days a week, with a one-hour maintenance break each weekday and a full weekend closure from Friday 5:00 PM ET to Sunday 6:00 PM ET.
What time does the stock market close?
The NYSE core session closes at 4:00 PM ET, after opening at 9:30 AM ET. On early-close days such as the day after Thanksgiving and Christmas Eve 2026, it closes at 1:00 PM ET. Equity index futures keep trading until 5:00 PM ET on normal days.
Can you trade futures at 6 PM?
Yes. The 6:00 PM ET reopen starts the next trade date for most CME futures, including Sunday's weekly open. Expect thin volume, since the first two hours after the reopen are the quietest of the session.
What happens to open orders during the daily break?
Day orders are cancelled at the 5:00 PM ET close. GTC and GTD orders stay in the book and can fill at the 6:00 PM ET reopen, possibly at a price beyond your order if the market opens through it.
When do Nasdaq futures trade?
E-mini Nasdaq-100 (NQ) and Micro E-mini Nasdaq-100 (MNQ) futures follow the same CME equity index hours as S&P 500 futures. They trade Sunday 6:00 PM ET to Friday 5:00 PM ET, with the daily break from 5:00 PM to 6:00 PM ET.
What are the risks of futures trading?
Futures are leveraged, so a small price move creates a large gain or loss relative to the money in the account. Losses can exceed the planned stop when price gaps through it at a reopen or after news. Thin overnight liquidity, slippage and margin changes add to that risk.
Before Your Next Futures Session
Write your trading day against the exchange clock, not your own habits. Note the windows you actually trade and what share of volume they carry, the time your account requires you to be flat, and the next maintenance break, holiday close and weekend closure on your calendar. Then check that every working order is the type you meant it to be before 5:00 PM ET.
Futures trading carries a substantial risk of loss and is not suitable for everyone. Leverage means losses can exceed what you planned, and a stop order does not guarantee a fill at its price. Session times, holiday hours and price limits are set by the exchange and can change, so confirm them on the exchange's current schedule before relying on them. The volume and gap figures above are historical measurements on one contract, not forecasts. Funded and evaluation accounts are simulated. This article is educational and is not financial advice.

