TL;DR: RTH vs ETH futures is a choice about which part of one continuous trading day your chart and rules measure. ETH is the full CME Globex session, 6:00 PM to 5:00 PM ET for ES, while RTH is a daytime slice tied to the stock market open. Use ETH for overnight context and risk, RTH for cash-open setups, and label every level by the session that built it.
Two traders pull up the same ES contract at the same minute. One sees VWAP below price, a 35-point gap up and yesterday's high still overhead. The other sees VWAP above price, no gap at all and yesterday's high already taken out. Neither chart is broken. One is showing RTH (regular trading hours) and the other is showing ETH (electronic trading hours), and the difference changes every level drawn from it.
The setting looks cosmetic. It isn't, because the levels it produces end up deciding entries, stops and whether a setup exists at all. This guide covers what the two sessions are, the real session times for common futures contracts, how stocks handle extended hours differently, how orders behave across the session, and how to build and use overnight levels without letting the chart setting make decisions for you.
What RTH and ETH Mean in Futures

RTH and ETH in futures are two ways of slicing the same continuous electronic session. The contract doesn't change. What changes is which bars your chart includes, and therefore which highs, lows, averages and gaps your indicators calculate.
- ETH (electronic trading hours) is the full session the exchange lists for the contract. For the E-mini S&P 500 (ES), CME Globex trades Sunday 6:00 PM to Friday 5:00 PM ET, with a daily maintenance period from 5:00 PM to 6:00 PM ET. That's 23 hours of trading a day.
- RTH (regular trading hours) is a reduced daytime window. It's mostly a charting and analysis convention rather than a separate market. TradingView, for example, defines RTH for CME Group futures as 8:30 AM to 3:15 PM CT, which is 9:30 AM to 4:15 PM ET.
- The overnight session (often called "Globex" or "ON") is the part of ETH that sits outside RTH, from the 6:00 PM ET reopen to the 9:30 AM ET cash open. For ES that's 15 hours 30 minutes, and CME's own price-limit rules treat the 5:00 PM to 8:30 AM CT window as its own period.
So why bother with an RTH view if futures trade almost around the clock? Because the S&P 500 stocks behind ES open at 9:30 AM ET, and participation, news flow and index-linked activity tend to cluster around that cash session. If your setup is built around the cash open, you want levels that come from that window alone, not ones dragged around by a 2:00 AM drift.
One naming trap: in this article ETH means electronic trading hours, not Ether. Some platforms also call the full session "extended trading hours" or simply "full session," and they mean the same thing.
Related lesson: How the daily session and maintenance break work
CME Futures Session Times for ES, CL, GC and Corn
Futures session boundaries are set contract by contract, so an RTH template that fits ES can be wrong for corn. The exchange publishes its hours in Central Time (CT), which is one hour behind Eastern Time (ET).
| Contract | CME Globex hours (ET) | Daily break (ET) | Effect of a generic 8:30 AM to 3:15 PM CT RTH template |
|---|---|---|---|
| ES and MES (S&P 500 index futures) | Sunday to Friday, 6:00 PM to 5:00 PM | 5:00 PM to 6:00 PM | Keeps 9:30 AM to 4:15 PM ET, lined up with the stock market open |
| CL (WTI crude oil) | Sunday to Friday, 6:00 PM to 5:00 PM | 5:00 PM to 6:00 PM | Same window, which is a chart convention, not crude's own daily timing |
| GC (gold) | Sunday to Friday, 6:00 PM to 5:00 PM | 5:00 PM to 6:00 PM | Same window, which hides most of gold's 23-hour session |
| ZC (corn) | Sunday to Friday 8:00 PM to 8:45 AM, and Monday to Friday 9:30 AM to 2:20 PM | 8:45 AM to 9:30 AM, then 2:20 PM to 8:00 PM | Runs past corn's 2:20 PM ET close, so the "RTH" view is really the day session |
How the ES Session Splits Into Overnight and RTH
For ES, the 23-hour trading day breaks down like this:
- Overnight: 6:00 PM to 9:30 AM ET (5:00 PM to 8:30 AM CT), 15 hours 30 minutes.
- RTH template: 9:30 AM to 4:15 PM ET (8:30 AM to 3:15 PM CT), 6 hours 45 minutes.
- Post-RTH: 4:15 PM to 5:00 PM ET (3:15 PM to 4:00 PM CT), 45 minutes.
- Maintenance break: 5:00 PM to 6:00 PM ET, no trading.
Note the 45-minute tail. An RTH chart ends at 4:15 PM ET, but ES keeps trading until 5:00 PM ET. Anything that happens in that window, such as an earnings reaction from a large index member, lands in the next day's "overnight" data on a split chart.
Settlement, Maintenance and Holiday Cutoffs in Futures
Several different clocks run inside one futures trading day, and mixing them up is a common source of bad levels.
- The RTH close on your chart is a template setting. It is not a market event.
- The daily settlement or reference price comes from a short window set by the exchange. For ES and MES, CME's daily reference price is the volume-weighted average of lead-month ES trades between 2:59:30 and 3:00 PM CT (4:00 PM ET). Other products use their own windows.
- The maintenance break (5:00 PM to 6:00 PM ET for ES, CL and GC) is when no trading happens and the next trading day begins.
- Holidays and early closes change all of these. Check the exchange holiday calendar before each holiday week instead of trusting a template.
- Time zones matter if you don't live in Chicago or New York. Because CME sets hours in CT, ET times stay fixed year round, but a trader in London or Sydney sees the US session shift by an hour for a few weeks each spring and autumn when clocks change on different dates.
Regular and Extended Hours in Stocks vs Futures
Regular and extended hours mean different things in stocks and futures, and most confusion about "RTH" comes from importing stock-market habits into futures.
In US stocks, the regular session is a real exchange event. The NYSE core trading session runs 9:30 AM to 4:00 PM ET, opening and closing with auctions. Pre-market and after-hours trading are separate sessions with their own order rules. The Nasdaq Stock Market's system runs 4:00 AM to 8:00 PM ET, and some brokers now offer an overnight session as well. Interactive Brokers, for example, lists overnight trading in US stocks and ETFs from 8:00 PM to 3:50 AM ET as of November 4, 2026.
How the Futures Session Differs From Stock Hours
In futures, there is one continuous session with one order book. A 3:00 AM ES trade is just as much a regular futures trade as a 10:00 AM one. RTH is a lens you apply, not a door that opens.
| Question | US stocks | CME futures such as ES |
|---|---|---|
| Is the regular session an exchange event? | Yes, 9:30 AM to 4:00 PM ET with opening and closing auctions | No, RTH is a charting convention inside one session |
| How are extended hours organized? | Separate pre-market, after-hours and broker overnight sessions | Part of the same Globex session, 6:00 PM to 5:00 PM ET |
| Does an order need a special flag? | Often yes, an "outside RTH" or extended-hours setting | No, an order works whenever Globex is open |
| Do overnight levels apply? | Yes, but extended-hours volume can be thin and venue-specific | Yes, overnight highs and lows come from the main order book |
| Do holiday early closes apply? | Yes, for example the NYSE closes at 1:00 PM ET on Friday, November 27, 2026 | Yes, on the exchange's own holiday schedule |
Do Overnight Levels Apply to Stocks and Futures
Do overnight and ETH levels apply to stocks, futures or both? Both, with a difference in weight. A stock's pre-market high is printed in a separate, usually thinner session. An ES overnight high was printed on the same order book that runs at 10:00 AM, which is why futures traders tend to treat overnight levels as part of the main auction rather than a footnote.
Order Types for RTH and ETH Futures Sessions
Order types behave the same across the futures session, but time in force, liquidity and the pre-open state matter more outside RTH.
Day and GTC Orders on CME Globex
On CME Globex, an order with no duration is treated as a day order. A day order stays active only for that trading day and expires at the end of it. The trading day ends at the 5:00 PM ET close, not at a chart's 4:15 PM ET RTH end. A resting day order placed at 10:00 AM can still fill at 4:40 PM ET.
A GTC (good-till-canceled) order stays on the book until it fills, you cancel it, or the contract expires. It will be live overnight. That's the point of it, and also the risk if you forgot it was there.
The Futures Pre-Open State
Before each session opens, Globex runs a pre-open period. Orders can be entered, changed or cancelled, but nothing matches. The exchange publishes an indicative opening price, the probable price where the most volume would trade if the market opened now. A stop placed during pre-open won't trigger until matching starts, and the first print can be well away from the last trade before the break.
Outside RTH and Overnight Orders in Stock Accounts
Stock brokers handle extended hours differently. At Interactive Brokers, an order needs the "Fill Outside RTH" attribute ("Allow order to be activated, triggered or filled outside of regular trading hours") to work in pre-market or after-hours, set per order or as a default. Their overnight session for US stocks is a separate order destination, so an Outside RTH flag on its own is not the same thing as an overnight order. That's the distinction behind the common "overnight order vs outside RTH order" question. Neither setting has a role in a CME futures order, because futures don't have a separate extended session to opt into.
Keeping a Futures Order to RTH Only
There is no "RTH only" time in force on CME Globex. A day order placed at 10:00 AM ET stays live through the 4:15 PM ET chart close and keeps working until the 5:00 PM ET end of the trading day. If your plan only trades the cash session, the platform won't enforce that for you:
- Cancel working entries before the RTH window ends, or use a platform's own time-based cancel feature if it has one.
- Check for resting GTC orders before you step away, since they stay live into the overnight session.
- Expect stops and limits placed during RTH to remain valid overnight, and decide whether that's what you want.
Choosing Order Types for Thin Futures Hours
The order types themselves don't change at night. What changes is the book behind them:
- A market order fills against whatever is resting. In a thin overnight book, that can mean several ticks of slippage.
- A stop becomes a market order once triggered, so the same slippage risk applies to your exit.
- A limit order controls price but may not fill if the market moves away.
- Around scheduled data releases, the book can thin out right before the number, in either session.
The habit worth building: check the spread and depth before you send a market order outside RTH, and size the position for the slippage the hour can produce, not the slippage you'd get at 10:00 AM.
Related lesson: The full menu of order types and when each fits
Setting Up Session Charts for Futures
Session charts for futures need three settings decided on purpose: the session template, the chart time zone, and where each indicator resets.
Chart Display Settings for RTH and ETH
Most platforms let you pick a session template per chart or per symbol. Names vary ("ETH," "full session," "extended hours," or a template like "CME US Index Futures RTH"). Two details catch people out:
- On TradingView, the RTH setting changes intraday bars only. The daily candle is the same whether you pick ETH or RTH, so an "RTH daily high" has to come from an intraday chart.
- Continuous contracts and the active contract month can carry different session templates or roll settings, so check both if you compare charts.
A clean setup many futures traders use is two charts: an ETH chart for context and risk, and an RTH chart for the cash-open trigger. Label the indicators ("ETH VWAP," "RTH VWAP") so a glance can't confuse them.
Marking the Overnight High and Low in Futures
To mark overnight levels on ES:
- On an ETH intraday chart, find the bars from the 6:00 PM ET reopen to 9:29 AM ET.
- Mark the highest high (overnight high), the lowest low (overnight low) and, if you use it, the midpoint between them.
- Mark the prior RTH high, low and close from the RTH chart, and the prior settlement or reference price.
- Note what printed overnight and why: a data release, a large move abroad, or nothing in particular.
Many platforms have a session high/low indicator that does this automatically. Check that its session window matches the one you meant.
How Session Choice Changes VWAP, Volume Profile and Gaps
VWAP is a running average from its reset point. Reset it at 6:00 PM ET and it carries the whole overnight auction. Reset it at 9:30 AM ET and it describes the cash session only. After a big overnight move, the two lines can sit far apart, and a "price above VWAP" rule gives opposite answers depending on which one you read.
Volume profile works the same way. An ETH profile includes overnight volume. An RTH profile isolates the daytime auction. Neither is more accurate. They answer different questions.
Gaps are the clearest example. Take an illustrative ES day: prior RTH close 6,000.00, overnight range 6,010.00 to 6,040.00, RTH open 6,035.00. On the RTH chart, that's a 35-point gap up, worth $1,750 per ES contract on paper. On the ETH chart there's no gap at all. Price walked up overnight through a 30-point range. A "gap fill" rule tested on one chart and traded on the other is testing a different event.
Session Map Template for a Futures Trading Day
Fill this in before the open. It doubles as a journal entry.
| Field | What to record | Illustrative ES entry |
|---|---|---|
| Contract and month | Exact tradable contract, not only the root | ES front quarterly month |
| Chart time zone | The zone every time in your plan uses | ET |
| Session template | Which chart supplies which levels | ETH for context, RTH for triggers |
| VWAP reset | Session start used | ETH VWAP from 6:00 PM, RTH VWAP from 9:30 AM |
| Overnight high and low | From 6:00 PM to 9:29 AM ET bars | 6,040.00 and 6,010.00 |
| Prior RTH high, low and close | From the RTH chart | Close 6,000.00 |
| Overnight driver | Data release, foreign session move or none | Note it |
| Holiday or early close | Checked against the exchange calendar | Yes or no |
Overnight Levels vs Regular Session Levels in Futures

Overnight levels and RTH levels in futures carry different information, and the useful question is what each one tells you, not which one is "real."
How Much Weight Overnight Futures Levels Carry
RTH levels usually form when participation is broadest, so many traders treat the prior RTH high, low and close as the stronger reference. Overnight levels form with fewer participants, but they still mark where buyers and sellers actually traded on the main book, often in response to real news. An overnight high that formed on a data surprise and an overnight high that formed on a slow drift at 2:00 AM don't deserve the same respect, even though both draw the same line.
A fair rule of thumb: treat an overnight extreme as a level to watch at the open, not a level to trade blind. The RTH reaction tells you whether it matters today. If price slices through it without a pause, it probably didn't.
Overnight Levels vs Other Daily Futures References
| Reference level | Session that builds it | What it tends to describe | When it usually loses relevance |
|---|---|---|---|
| Prior RTH high and low | RTH | Where the broad cash-session auction found its limits | Once the new RTH session trades well beyond them and holds |
| Prior settlement or reference price | Exchange window near 3:00 PM CT for ES | The official mark that P&L and price limits use | Replaced by the next settlement |
| Prior RTH close | RTH | Where the cash session ended, used for RTH gaps | After the gap is filled or clearly rejected |
| Overnight high and low | Overnight portion of ETH | How far price explored before the cash open | Often after the first hour of RTH, or once taken out and held |
| Overnight midpoint | Overnight portion of ETH | Whether the open is above or below overnight balance | Usually same-day only |
| RTH open | RTH | The first cash-session price and opening range anchor | Same day |
How Long Overnight Levels Stay Valid
An overnight high or low is mostly a same-day reference. Once RTH trades through it and holds on the other side, it has done its job, and carrying it forward for a week adds clutter rather than information. Prior RTH levels and prior settlement tend to stay relevant a bit longer, often until a new day's auction clearly moves away. A level that formed on a major release can matter longer than a quiet one, so record what created it, not just the price.
Related lesson: How traders define and test support and resistance
Why Overnight Futures Highs and Lows Get Swept
Overnight futures highs and lows get revisited after the open for structural reasons, not because the market "hunts" them on purpose.
- Resting orders cluster there. Traders who sold the overnight high often place buy stops just above it, and breakout traders place buy stops there too. The same happens below the overnight low. A price that reaches those orders triggers them, which can push price a few ticks further before it settles.
- Participation jumps at the open. The cash open brings volume that wasn't there at 3:00 AM. A range built on light volume often gets tested once that volume arrives.
- Overnight extremes are often thin. If the overnight high printed on one quick spike, there may have been little trading at that price. The day session may come back to test whether anyone wants to trade there.
None of this makes a sweep likely on any given day. Sometimes price opens and leaves the overnight range behind in the other direction. The trading question is never "will the overnight high get swept?" It's "if it does, does price accept above it or reject back below it?"
Related lesson: What stop runs and liquidity sweeps look like on a chart
Futures Trading Plans Using the Overnight High and Low
Trading plans built on overnight futures levels work best as if/then scenarios written before the open, not as reactions to a touch. Using the illustrative ES day again: overnight high 6,040.00, overnight low 6,010.00, overnight midpoint 6,025.00, prior RTH close 6,000.00, RTH open 6,035.00.
Scenario One, Acceptance Above the Overnight High
Price opens at 6,035.00, pushes through 6,040.00, and then holds above it on a pullback instead of falling back into the range. That's acceptance. A plan might enter on the retest at 6,042.00 with a stop at 6,036.00, back inside the range where the idea is clearly wrong.
What would cancel it: a fast return below 6,040.00 and a close back inside the overnight range on your trigger timeframe.
Scenario Two, A Failed Break of the Overnight High
Price trades to 6,043.00, triggers the stops above the overnight high, and then falls back below 6,040.00 within a few bars. That's a rejection, and a plan might look for a short back toward the overnight midpoint at 6,025.00. The temptation here is to short the first touch of 6,040.00 because "overnight highs get swept." Wait for the evidence: the break and the failure, in that order.
Scenario Three, An Open Inside the Overnight Range
If price opens inside the range and keeps rotating between 6,010.00 and 6,040.00, both edges are still in play and the midpoint often acts as a pivot. Doing nothing until one edge breaks is a valid plan, even if it feels like missing the open. Forcing a direction inside a range the overnight session already defined is one of the more common ways to give back the first hour.
Sizing the Stop in ES or MES
Stop size on an overnight-level trade decides whether it fits the account. Take an illustrative ES long at 6,042.00 with a stop at 6,036.00 just inside the overnight range. That's 6 points, or 24 ticks. ES is $50 per point, so one contract risks $300. MES is $5 per point, so one micro risks $30. On an illustrative $5,000 account, that's 6% of the account on one ES trade versus 0.6% on one MES trade. The chart level is identical. Whether the trade fits the account is a completely different question, and it gets answered before the entry, not after the stop is hit.
Related lesson: How opening-range breakout rules define the open
Holding a Futures Position From the Overnight Session Into the Day

A futures position opened during the overnight session and held into RTH is still one trading day. In futures, the real dividing line is the daily close and maintenance break at 5:00 PM ET, not the 9:30 AM cash open or the 4:15 PM chart close.
That has practical consequences:
- Broker margin is set by clock, not by chart. Many futures brokers apply a lower day-trading margin during set hours and require the full exchange margin for positions held past their own cutoff. The cutoffs and amounts are broker-specific and change, so check yours instead of assuming the RTH close is the line.
- Settlement happens mid-session. For ES the daily reference price is set near 3:00 PM CT, while trading continues until 4:00 PM CT. Your account's daily P&L may be marked before you close the position.
- Rule sets often use their own clock. Prop firms and some brokers set a "flat by" time a few minutes before the close. That time, not the chart template, decides whether a position is allowed.
On our accounts, the trading day runs 6:00 PM to 5:00 PM ET, and every position has to be closed by 4:45 PM ET (12:59 PM ET on holiday early closes). So ETH trading is allowed, and a trade opened at 8:00 PM Monday can be held through Tuesday's RTH and closed at 2:00 PM, because it's one session. What isn't allowed is carrying a position past 4:45 PM ET into the next session. Positions still open at the close are closed automatically, which doesn't fail the account but can fill at a worse price.
Related lesson: How overnight and intraday futures margin differ
RTH vs ETH Futures FAQ
What does "RTH session" mean?
RTH means regular trading hours. In futures it's a daytime slice of the full electronic session, commonly 9:30 AM to 4:15 PM ET for CME products on charting platforms. It lines up with the US stock market's cash session but is a charting convention, not a separate futures market.
What is ETH in trading?
ETH stands for electronic trading hours, sometimes called extended trading hours. In futures it means the full session the exchange lists, which for ES runs 6:00 PM to 5:00 PM ET with a one-hour daily break. It shouldn't be confused with Ether, the cryptocurrency.
What does RTH mean in stock trading?
In stocks, RTH is the core exchange session, 9:30 AM to 4:00 PM ET for NYSE and Nasdaq. Pre-market and after-hours trading happen outside it, and orders often need an extended-hours setting to work there.
Why do people trade futures instead of stocks?
Common reasons include nearly 24-hour access on one order book, exposure to a whole index or commodity in one contract, and the ability to go short as easily as long. Futures were also never subject to the pattern-day-trader rule that has applied to stock margin accounts, a rule FINRA is now replacing. Futures carry their own risks, including leverage that can produce losses larger than expected.
Is $5,000 enough to trade futures?
$5,000 can be enough for micro futures such as MES, which move $1.25 per tick, but it's thin for full-size contracts like ES at $12.50 per tick. A normal ES stop can take a large share of that balance in one trade. Margin is set by the broker and changes, so size from the stop distance first, then check whether the account can carry it.
Should VWAP reset at the RTH or ETH open?
Reset it to match the question you're asking. An ETH reset describes the whole trading day including the overnight auction. An RTH reset describes the cash session only. Pick one per rule and use it the same way in testing and live trading.
Common RTH vs ETH Futures Mistakes
Most RTH vs ETH futures mistakes come from the same root: using a level without knowing which session built it. Each one below is easy to make once and expensive to repeat.
- Calling an RTH gap a real gap. The contract traded through the night. Check the ETH chart before treating an RTH gap as an unfilled void.
- Mixing VWAPs. Backtesting with an RTH reset and trading off an ETH reset, or the reverse, means the live rule isn't the tested rule.
- Copying the ES template to other contracts. Corn, crude and gold have their own hours and settlement windows.
- Ignoring the 4:15 PM to 5:00 PM ET tail. Moves in that window show up as "overnight" on a split chart.
- Forgetting holidays and clock changes. Early closes and daylight-saving mismatches shift sessions. The exchange calendar wins over any saved template.
- Treating ETH as noise. Overnight moves on real news are real price discovery, and your risk is live through them if you hold.
- Treating a session setting as an edge. The template only organizes data. A setup still needs a trigger, a stop, costs and a fair sample.
Futures are leveraged, and losses can build faster than expected, especially in thin overnight hours or around news. Simulated and funded evaluation accounts are simulated trading, and results there don't guarantee results in a live account. This article is education, not financial advice.

