TL;DR: Calculating futures P&L means multiplying the price change by the contract's point value and the number of contracts. Tick value is the multiplier times the tick size, so one ES tick is $12.50 and one MES tick is $1.25. Longs use exit minus entry, shorts use entry minus exit, and net P&L subtracts round-turn costs and slippage. A dollar target is only useful if the contract usually travels far enough in a session to reach it.
You closed a trade for what looked like 10 points, and the statement shows a different number. Usually nothing is broken. The math used the wrong multiplier, the wrong tick size, a cost that was never counted, or an average exit that was never weighted.
Calculating futures P&L is subtraction and multiplication. The work is in the inputs. Futures profit and loss is the change in the price of a contract, converted into dollars by a fixed multiplier and settled in cash every day, so the contract's specification matters as much as the chart.
What Futures P&L Measures
Futures P&L measures how far the price of a contract moved between your entry and your exit, multiplied by what each unit of that move is worth. You never pay the full contract value up front and you never receive it at the end. You post margin, and the price difference is credited to or debited from your account as the position moves.
The CFTC describes mark-to-market as part of the daily cash flow system US futures exchanges use, calculating the gain or loss on each position from price changes at the end of each trading session. So an open futures position has a P&L every day, not only on the day you close it.
A completed trade is a round turn: in CFTC terms, a purchase followed by a liquidating sale, or a sale followed by a covering purchase. Every commission and fee figure in a futures P&L calculation should be stated per round turn or doubled to get there.
Related lesson: Realized and unrealized profit explained
Contract Specs That Drive Futures P&L
Every futures P&L calculation needs three contract facts before you look at a price.
- Point value (also called the multiplier or contract unit): how many dollars one full point of the quoted price is worth.
- Tick size: the smallest price increment the exchange allows.
- Tick value: the point value multiplied by the tick size.
The table lists those figures for four full-size contracts and their micro versions, taken from CME Group's contract specifications.
| Contract | Contract unit | Point value | Tick size | Tick value |
|---|---|---|---|---|
| ES E-mini S&P 500 | $50 x S&P 500 Index | $50 per index point | 0.25 index points | $12.50 |
| MES Micro E-mini S&P 500 | $5 x S&P 500 Index | $5 per index point | 0.25 index points | $1.25 |
| NQ E-mini Nasdaq-100 | $20 x Nasdaq-100 Index | $20 per index point | 0.25 index points | $5.00 |
| MNQ Micro E-mini Nasdaq-100 | $2 x Nasdaq-100 Index | $2 per index point | 0.25 index points | $0.50 |
| CL Crude Oil | 1,000 barrels | $1,000 per $1.00 move | $0.01 per barrel | $10.00 |
| MCL Micro WTI Crude Oil | 100 barrels | $100 per $1.00 move | $0.01 per barrel | $1.00 |
| GC Gold | 100 troy ounces | $100 per $1.00 move | $0.10 per troy ounce | $10.00 |
| MGC Micro Gold | 10 troy ounces | $10 per $1.00 move | $0.10 per troy ounce | $1.00 |
Checking a Tick Value
Check every row of the contract table the same way. ES is 0.25 x $50 = $12.50. CL is $0.01 x 1,000 = $10.00. GC is $0.10 x 100 = $10.00. If a calculator or a platform shows a tick value that does not match the multiplier times the tick size, one of the inputs is wrong.
Two patterns matter for P&L. Each micro has the same tick size as its full-size contract and one tenth of the multiplier, so ten MES contracts carry the same dollar exposure per point as one ES. And contracts with similar tick values can move in very different steps: ES and CL ticks are worth a similar amount, but one is a quarter of an index point and the other is one cent per barrel.
What One Lot Means in Futures
In futures, "lot" means contracts. The CFTC defines a lot as a unit of trading established by an exchange, and a round lot as a quantity equal in size to the futures contract, so one lot is one contract. Forex lot sizes are a different system and do not carry over.
Related lesson: Futures contract specifications field by field
The Futures P&L Formula

The futures P&L formula has two equivalent routes. Use whichever one fits the way the contract is quoted, then use the other to check.
Points route: P&L = price change x point value x number of contracts.
Ticks route: P&L = (price change / tick size) x tick value x number of contracts.
CME Group's own course uses the ticks route on crude oil. A trader buys one WTI contract at $53.60 and the price rises to $54.00. The move is $0.40, which is $0.40 / $0.01 = 40 ticks. At $10 per tick, the profit is 40 x $10 = $400 per contract, multiplied by however many contracts are held. CME adds that losses are calculated the same way as gains.
The points route gives the same answer: $0.40 x $1,000 per $1.00 move = $400. If the two routes ever disagree, you have the wrong tick size or the wrong multiplier.
The price change is signed. That is what makes the formula work for both directions, and it is also where most errors come from on short trades.
Related lesson: Tick size and tick value
Calculating Futures P&L on Long and Short Trades

Calculating futures P&L on a long trade uses exit minus entry. On a short trade it uses entry minus exit. In both cases the result is multiplied by the point value and the number of contracts.
- Long: (exit price - entry price) x point value x contracts.
- Short: (entry price - exit price) x point value x contracts.
A positive result is a profit and a negative result is a loss. The four illustrative trades in the table use round prices, not quotes.
| Trade | Entry | Exit | Price change in your favor | Ticks | Contracts | P&L |
|---|---|---|---|---|---|---|
| Long ES | 7,000.00 | 7,012.50 | +12.50 points | 50 | 2 | +$1,250.00 |
| Short NQ | 25,000.00 | 24,950.00 | +50.00 points | 200 | 1 | +$1,000.00 |
| Short CL | $70.00 | $70.45 | -$0.45 | 45 against | 1 | -$450.00 |
| Long GC | $4,000.00 | $3,992.40 | -$7.60 | 76 against | 1 | -$760.00 |
Walk through the short crude oil trade. You sell one CL at $70.00 and buy it back at $70.45. Entry minus exit is $70.00 - $70.45 = -$0.45. Times 1,000 barrels, that is -$450.00. The ticks route agrees: 45 ticks x $10.00 = $450, against you.
The short side trips people up because the price went up and the instinct says "up is good." For a short it is not. Write the formula with the entry first and let the sign do the work, rather than deciding the sign in your head after the fact.
The long gold trade is the same idea in reverse. Buying at $4,000.00 and selling at $3,992.40 is a $7.60 drop, 76 ticks of $10.00, so -$760.00 on one contract.
Related lesson: How long and short positions work
Futures P&L Examples for ES, NQ, Crude Oil and Gold
The same price move produces very different dollar results depending on the contract. The table takes one illustrative move per market and prices it on the full-size and micro versions.
| Contract | Illustrative move | Ticks | P&L per contract |
|---|---|---|---|
| ES | 8.00 points | 32 | $400.00 |
| MES | 8.00 points | 32 | $40.00 |
| NQ | 30.00 points | 120 | $600.00 |
| MNQ | 30.00 points | 120 | $60.00 |
| CL | $0.50 per barrel | 50 | $500.00 |
| MCL | $0.50 per barrel | 50 | $50.00 |
| GC | $5.00 per troy ounce | 50 | $500.00 |
| MGC | $5.00 per troy ounce | 50 | $50.00 |
Nothing about the market changes between ES and MES in that table. Only the multiplier does. That is the practical reason micros exist: they let a trader take the same chart decision at one tenth of the dollar result.
The flip side is that a micro needs ten times the price move to produce the same dollars. A $400 result is 8 points on one ES and 80 points on one MES.
Related lesson: Mini and micro futures compared
Net Futures P&L After Commissions, Fees and Slippage

Gross futures P&L is the price result. Net P&L is what reaches your account after three kinds of cost.
- Commissions, charged by your broker per contract, usually quoted per side or per round turn.
- Exchange, clearing and regulatory fees, which CME's fee schedule charges per side per contract, often passed through on top of the commission.
- Slippage and the spread, the difference between the price you planned and the price you got. It never appears on a fee schedule, but it comes out of P&L the same way.
Take an illustrative long of 2 ES from 7,000.00 to 7,012.50: 12.50 points x $50 x 2 = +$1,250.00 gross. Assume an all-in cost of $4.00 per contract per round turn, purely for illustration. Costs are $4.00 x 2 = $8.00, so net is $1,242.00. Now add one tick of slippage on the entry and one on the exit. That is 2 ticks per contract, 4 ticks across the position, or 4 x $12.50 = $50.00. Net after slippage is $1,192.00.
On ES, a $4.00 round turn equals 0.32 of a tick. One tick of slippage is worth more than three times that commission. If you only track commissions, you are watching the smaller cost and missing the one that grows when you chase fills with market orders.
Why Ten Micros Cost More Than One Mini
Costs scale with contract count, not with exposure. Assume $1.50 per MES round turn, again illustrative. Ten MES contracts carry the same exposure as one ES, but cost 10 x $1.50 = $15.00 against $4.00 for the single ES.
On an 8-point win, ten MES gross 10 x 32 ticks x $1.25 = $400.00 and net $385.00. One ES grosses the same $400.00 and nets $396.00. Once your size reaches the equivalent of a full contract, the mini is usually the cheaper way to hold it.
Related lesson: Breakeven after commissions
Futures P&L as a Return on Margin
Futures P&L is a dollar figure. Turning it into a percentage depends entirely on what you divide it by, and futures give you three very different choices.
Margin is a performance bond, not a down payment. The CFTC says futures margin is typically between 2% and 10% of the contract's value. Initial margin is what you need to open a position; maintenance margin is the level equity must stay above while it is open. If equity drops to or below maintenance, the broker issues a margin call to bring it back to the initial level. CME Clearing sets exchange margins and changes them as volatility changes, and brokers can require more, so never treat a margin figure as fixed.
Here is one illustrative long MES trade, using a margin figure invented for the example rather than a CME or broker number.
| Measure | Value | Return on a +$100.00 trade |
|---|---|---|
| Notional value at 7,000.00 | $35,000 | 0.29% |
| Illustrative initial margin | $2,500 | 4.00% |
| Account balance | $10,000 | 1.00% |
The trade is 7,000.00 to 7,020.00, or 20.00 points x $5 = $100.00. The same $100 looks tiny against notional and large against margin. A 20-point move the other way is a 4.00% loss on that margin just as fast. That is what leverage means in practice.
Return on capital is net P&L divided by the capital you choose as the base, times 100. Use net, not gross: on that MES trade, an illustrative $1.50 round turn turns $100.00 into $98.50, or 3.94% of the $2,500 margin. Whatever base you pick, name it every time, because a 4.00% month on margin and a 1.00% month on the account can be the same trades.
The CFTC band gives a sense of scale: 2% to 10% of $35,000 is $700 to $3,500. Where a margin call lands follows from the P&L formula. With an illustrative maintenance level of $2,250, the cushion from $2,500 is $250, and $250 / $5 per point = 50.00 points against the position. A crypto exchange applies similar logic to compute a liquidation price; on a CME futures account the trigger is your broker's margin policy rather than a published price.
Daily Mark-to-Market and Futures P&L
Mark-to-market means your futures P&L is settled every day against an official settlement price, not just when you close. CME's mark-to-market course explains that the final daily settlement price is the same for everyone and that losers pay winners every day. For ES, that settlement comes from the volume-weighted average price of lead month trades between 3:14:30 PM and 3:15 PM CT.
Take an illustrative short of one ES at 7,000.00 held for three sessions.
| Day | Price used | Change in your favor | Daily P&L |
|---|---|---|---|
| Day 1 | Settles 6,990.00 | +10.00 points | +$500.00 |
| Day 2 | Settles 7,006.00 | -16.00 points | -$800.00 |
| Day 3 | Covered at 6,995.00 | +11.00 points | +$550.00 |
| Total | Entry 7,000.00 to exit 6,995.00 | +5.00 points | +$250.00 |
The daily amounts add up to the same +$250.00 as the simple formula (7,000.00 - 6,995.00) x $50. Mark-to-market changes the timing of cash, not the final total.
Timing still matters. On day 2 the account is debited $800 even though the trade ends as a winner. If that debit pushes equity below maintenance, you face a margin call on a trade that was right in the end.
Until you exit, profit and loss on an open position is unrealized. The settled cash is real, but the trade's final result is not locked until the round turn is complete.
Related lesson: Mark-to-market in futures
Weighted Exits on a Scale-Out
Scaling out of a futures position splits one trade into several exits, and that is where hand-calculated P&L most often drifts from the statement.
The illustrative trade uses a real session for its price range. On February 26, 2025, Yahoo Finance's daily bar for the continuous front-month ES contract opened at 5,982.00, reached 6,023.75, fell to 5,945.50 and closed at 5,970.75. The range was 78.25 points, or 313 ticks: $3,912.50 on one ES and $391.25 on one MES.
Suppose a trader bought four ES at the 5,982.00 open and exited in three pieces inside that range (illustrative exits, not a record of the order of trades that day).
| Exit leg | Contracts | Exit price | Points gained | Gross P&L |
|---|---|---|---|---|
| First target | 2 | 5,992.00 | 10.00 | $1,000.00 |
| Second target | 1 | 5,988.00 | 6.00 | $300.00 |
| Third target | 1 | 5,985.00 | 3.00 | $150.00 |
| Position total | 4 | 5,989.25 weighted | 29.00 contract-points | $1,450.00 |
With an illustrative $4.00 per contract round turn, costs are $16.00 and net is $1,434.00.
The check worth doing is the average exit, because this is the number traders eyeball and get wrong. The simple mean of the three exit prices is 5,988.33, but the size-weighted average is 5,989.25, because the biggest leg exited at the best price. The gap is 0.9167 points. On four contracts, that is $183.33: using the simple mean gives $1,266.67 instead of $1,450.00. When you reconcile against a statement, weight every exit by its contract count.
Related lesson: Scaling in and scaling out
Turning a Dollar Target Into Ticks
Most traders think in dollars and the chart thinks in ticks. Running the futures P&L formula backwards converts one into the other: divide the dollar target by the tick value for ticks, or by the point value for points.
| Dollar target | ES ticks and points | MES ticks and points | NQ ticks and points | MNQ ticks and points | CL ticks and move | GC ticks and move |
|---|---|---|---|---|---|---|
| $100 | 8 ticks, 2 points | 80 ticks, 20 points | 20 ticks, 5 points | 200 ticks, 50 points | 10 ticks, $0.10 | 10 ticks, $1.00 |
| $250 | 20 ticks, 5 points | 200 ticks, 50 points | 50 ticks, 12.5 points | 500 ticks, 125 points | 25 ticks, $0.25 | 25 ticks, $2.50 |
| $500 | 40 ticks, 10 points | 400 ticks, 100 points | 100 ticks, 25 points | 1,000 ticks, 250 points | 50 ticks, $0.50 | 50 ticks, $5.00 |
| $1,000 | 80 ticks, 20 points | 800 ticks, 200 points | 200 ticks, 50 points | 2,000 ticks, 500 points | 100 ticks, $1.00 | 100 ticks, $10.00 |
| $2,500 | 200 ticks, 50 points | 2,000 ticks, 500 points | 500 ticks, 125 points | 5,000 ticks, 1,250 points | 250 ticks, $2.50 | 250 ticks, $25.00 |
Every figure is for one contract. Read the ES and MES columns together: a $500 target is 10 points on ES and 100 points on MES. The smaller contract does not make the target easier. It makes the same dollars a much bigger move on the chart.
How Often ES Covers a Futures P&L Target
A futures P&L target only matters if the market usually travels far enough to reach it. To put numbers on that, this guide measured 20 years of ES daily ranges.
Method: Yahoo Finance daily bars for the continuous front-month ES contract (symbol ES=F), September 18, 2006 to September 17, 2026. That is 5,042 dated rows; 9 carried no price, leaving 5,033 sessions. Each session's range is its high minus its low. No fills, costs or intraday order of events are modelled, and the continuous series switches contract months at each roll.
How Wide an ES Session Usually Is
| Statistic | ES daily range, Yahoo Finance ES=F bars |
|---|---|
| Lower quartile | 16.50 points |
| Median | 27.25 points (109 ticks) |
| Upper quartile | 51.50 points |
| Mean | 40.18 points |
| Largest session | 648.25 points (April 9, 2025) |
The mean sits well above the median because a small number of violent sessions stretch it. A typical day is closer to the median than the mean.
Now compare those ES=F ranges with dollar targets on one contract. The question is narrow: in what share of the 5,033 sessions was the whole high-to-low range smaller than the move the target needs?
| Target on one contract | Move required | Sessions with a smaller range | Share of sessions |
|---|---|---|---|
| $500 on ES | 10 points | 316 | 6.28% |
| $1,000 on ES | 20 points | 1,743 | 34.63% |
| $2,500 on ES | 50 points | 3,720 | 73.91% |
| $500 on MES | 100 points | 4,692 | 93.22% |
In this guide's count of Yahoo Finance ES=F bars, a 20-point ES target was physically out of reach in about a third of sessions, before any question of timing your entry. A 50-point target needed more than the whole day's range in nearly three sessions out of four. A target that needs most of the day's range is a hope, not a plan.
This is where dollar goals cause damage. A trader who decides "I need $1,000 today" on one ES has quietly committed to a 20-point move, and on a narrow day the temptation is to hold past the plan or add size to make the number. The data says the number was not available on many of those days.
Target and Stop Touched on the Same ES Bar
The same Yahoo Finance ES=F data shows a limit on what daily bars can tell you. This guide tested a long from each bar's open with a 10-point target and an 8-point stop across all 5,033 sessions.
| Outcome on the ES=F daily bar | Sessions | Share of sessions |
|---|---|---|
| Both target and stop touched | 1,607 | 31.93% |
| Target only | 1,233 | 24.50% |
| Stop only | 1,494 | 29.68% |
| Neither | 699 | 13.89% |
In the same count, the mirrored short had both levels touched in 1,610 sessions (31.99%).
That 31.93% from the ES=F bars is not a win rate or a loss rate. It is the share of sessions where a daily bar cannot say which level traded first. Any backtest that assumes the target filled first on daily data is making an unstated guess on roughly a third of its trades.
Sizing Risk per Contract From Tick Value
The futures P&L formula works backwards for risk. Your stop distance in ticks times the tick value is your planned loss per contract. Divide your risk budget by that number and round down to get a contract count.
Take an illustrative $500 risk budget and an 8-point stop.
| Contract | Planned loss per contract | Contracts within $500 | Planned risk used |
|---|---|---|---|
| ES | 32 ticks x $12.50 = $400 | 1 | $400 |
| MES | 32 ticks x $1.25 = $40 | 12 | $480 |
| NQ | 8 points x $20 = $160 | 3 | $480 |
Round down, never up. Three NQ at $160 each uses $480; a fourth would put the plan at $640. The leftover $20 or $100 is not money to use up. It is the margin of error for a fill worse than your stop.
Why a Stop Does Not Cap Your Loss
A stop order becomes a market order once its price is reached, and a market order guarantees execution but not price. If the market trades through your level, you get the next available fill.
Say a long ES entered at 7,000.00 has a sell stop at 6,992.00, planned risk 8 points or $400. A fast break fills the stop at 6,989.00. The loss is 11 points, $550, which is $150 more than the plan on one contract. Size so that a fill a few points worse than the stop would still be a loss you can take.
Traders sometimes add a daily loss cap on top of per-trade stops. The same formula applies: a daily cap divided by planned loss per trade tells you how many full losses you can take before you stop for the day.
Related lesson: Position sizing for futures contracts
Perpetual Futures P&L and Funding Payments
Perpetual futures are crypto derivatives with no expiry date, and their P&L follows each exchange's own rules rather than CME conventions. If a P&L calculator asks for leverage and shows a liquidation price, it was almost certainly built for perpetuals, and its output will not match a CME futures statement.
Bybit's help center publishes the formulas for its USDC perpetuals:
- Long unrealized P&L = (mark price - average entry price) x position size.
- Short unrealized P&L = (average entry price - mark price) x position size.
- ROI = P&L / initial margin x 100%, where initial margin = position size x entry price / leverage.
Three differences from CME futures stand out. Size is in units of the coin, not contracts with a fixed multiplier. Unrealized P&L is marked at the exchange's mark price, not the last trade. And there are funding payments.
Binance describes funding as periodic payments between longs and shorts designed to anchor the perpetual price to the spot index. When the rate is positive, longs pay shorts; when negative, shorts pay longs. Funding amount = nominal value of the position x funding rate, with a default interval of every 8 hours.
An illustrative example with round numbers: long 0.5 BTC at 100,000, mark price 102,000. Unrealized P&L is 2,000 x 0.5 = 1,000 USDC. At 10x leverage, initial margin is 0.5 x 100,000 / 10 = 5,000, so ROI is 20%. If the funding rate is 0.01% per interval, a long pays 51,000 x 0.01% = 5.10 per interval, or 15.30 a day across three intervals. A 0.055% taker fee on the opening trade costs 27.50.
A position held for weeks pays or receives funding many times over, so perpetual net P&L needs that line in the calculation. CME futures have no funding payment; their equivalent cost is built into the futures price and the roll.
Futures P&L Compared With Options and Forwards
Futures P&L is linear: every tick is worth the same amount, in both directions, with no ceiling on either side. Options and forwards both break that pattern in different ways.
Options. An option gives the buyer the right, but not the obligation, to buy or sell at a set price, and the buyer pays a premium for it. A standard US equity option generally represents 100 shares. An illustrative call bought at $2.20 costs $220. If the underlying finishes $5.00 above the strike at expiry, the P&L is ($5.00 - $2.20) x 100 = $280. If it finishes below the strike, the buyer loses the $220 premium and no more. A futures position has no such floor: the loss keeps growing tick by tick.
Forwards. The CFTC describes a forward as an agreement to deliver a set quantity at a future date, with terms more personalized than standardized futures. The P&L arithmetic is the same price difference times quantity. The difference is timing: CME's mark-to-market course notes that daily marking was what separated futures from forwards before the post-2008 reforms, when most over-the-counter forwards had no official daily settlement price. A forward's P&L could sit unrealized until maturity, while a futures P&L is paid or collected every day.
Unit Mistakes That Distort Profit and Loss
Most wrong futures P&L figures come from a unit or ordering assumption, not bad arithmetic. Each mistake in the table has a quick check.
| Mistake | What goes wrong | The check |
|---|---|---|
| Wrong tick size | Ticks counted at the wrong increment, result off by a factor of 4, 10 or more | Tick value must equal multiplier x tick size |
| Mini multiplier on a micro | MES priced at $50 a point instead of $5 | Confirm the symbol on the fill, not the chart |
| Sign flipped on a short | A losing short recorded as a winner | Always write entry minus exit for shorts |
| Per-side commission used as round turn | Costs understated by half | Restate every cost per round turn |
| Simple mean of exits | Scale-out P&L misstated | Weight each exit by contract count |
| Stop price used as fill price | Planned loss understates the real loss | Size for a fill worse than the stop |
| Percentage on margin read as percentage on account | Returns and losses look larger or smaller than they are | Name the denominator every time |
Calculating Futures P&L FAQ
How is PnL calculated on a futures trade?
Multiply the price change by the contract's point value, then by the number of contracts. For a long, the price change is exit minus entry; for a short, it is entry minus exit. One ES contract that gains 10 points makes 10 x $50 = $500 before costs.
How are futures prices calculated?
Futures prices are set by bids and offers on the exchange, not by a formula. The exchange then publishes a daily settlement price used to mark positions; for ES it is the volume-weighted average of trades between 3:14:30 PM and 3:15 PM CT. As expiry approaches, the futures price converges toward the cash price.
How many contracts is 1 lot size in futures?
One lot is one contract. The CFTC defines a round lot as a quantity equal in size to the corresponding futures contract. Forex lots of 100,000 currency units are a separate convention.
What is the 80% rule in futures trading?
The 80% rule is a Market Profile guideline saying that price which re-enters the prior session's value area tends to cross to its other edge. It is not a P&L formula. If price opens outside the prior session's value area, then re-enters and holds inside for two consecutive 30-minute periods, traders taking the rule expect a move to the opposite edge, often quoted as roughly 80% likely. Treat the 80% as a claim to test on your own market, not a known probability.
Checking Your Next Futures P&L Calculation
Before your next trade, write down three numbers from the contract specification: point value, tick size and tick value. Check that the tick value equals the multiplier times the tick size. Then convert your dollar target and your stop into ticks on that contract and compare the target with how far the contract usually travels in a session.
After the trade, record fills as they happened. Weight every exit by contract count, list commissions, fees and slippage as separate lines, and keep realized and unrealized P&L apart. Over a few hundred trades, those cost lines explain much of the gap between a strategy that works on paper and one that works in an account.
On our accounts the same formula applies, with a few specifics. Round-trip commissions are $5.76 per ES and $1.82 per MES, so ten MES cost $18.20 against $5.76 for one ES. Our trailing drawdown is enforced in real time on net liquidation value, so open, unrealized P&L counts against it, not just closed trades. And positions close by 4:45 PM ET each trading day, so there is no overnight mark-to-market to carry on our evaluation and simulated funded accounts.
Futures trading involves substantial risk of loss and is not suitable for everyone. Leverage means a small price move can produce a loss that is large relative to the margin or account involved, and a stop order does not guarantee your exit price. Figures in this guide are arithmetic examples and a historical measurement, not projections. Evaluation and funded accounts are simulated, and results there may differ from live markets. This is education, not individual investment advice.

