TL;DR: An OCO order links a profit target and a stop so that when one fills, the other is canceled. On 1 MES long at 6000.00, a 6010.00 limit and 5994.00 stop risk $30.00 to make $50.00. Your broker or platform holds the link, not CME Globex, so in a fast market both legs can fill. Tradovate's web trader, NinjaTrader and Binance each treat a manual cancel differently.
You are in a trade. You know where you want to take profit and you know where the idea is wrong. You want both orders working, and you want only one of them to ever execute. That is the whole job of an OCO order.
It sounds like a small convenience. In practice it is the difference between a closed trade and a closed trade plus a stray order that opens a new position an hour later. The link also has edges most traders only find the hard way: who actually holds it, what a manual cancel does, and what happens when the market moves faster than the cancel.
What Is an OCO Order
An OCO order is two orders tied together so that the execution of one cancels the other. OCO stands for one-cancels-the-other (some platforms write "one cancels other" or "order cancels order"). CME Group's rulebook definitions describe a one-cancels-other order as a combination of two orders in which the execution of either one automatically cancels the other.
The classic pair is an exit plan on an open position:
- A limit order at your profit target, away from the market on the winning side.
- A stop order at your invalidation level, away from the market on the losing side.
Whichever price trades first fills, and the other order is pulled.
The value of an OCO order is mostly in what it prevents. Without the link, the order that did not fill stays alive. Say you are long and your target fills. The position is now flat, but your sell stop is still working. If price later falls through it, that stop sells again and opens a short you never meant to hold. Schwab's education page on advanced order types makes the same point with a stock example: canceling the stop when the target fills removes the risk of inadvertently opening a short position.
So an OCO order is less a new order type and more a rule placed on top of two ordinary orders.
Related lesson: Order types overview
How OCO Orders Work

An OCO order works in three steps: two orders rest at the same time, one of them fills, and a cancel instruction is sent for the other.
- Both legs are live. The target limit and the protective stop sit on opposite sides of the current price.
- Price reaches one leg. A limit leg fills at its price or better. A stop leg triggers and becomes a market order (or a limit order, for a stop-limit).
- The partner is canceled. The system that holds the link sees the fill and cancels the other order.
The detail most explanations skip is where step 3 happens. CME Globex, the electronic market for CME futures, lists limit, market with protection, market-limit, stop-limit and stop with protection as its order types for futures and options. An OCO order is not on that list. The rulebook defines the term, but the matching engine does not hold the pair as one linked instruction.
That means the link lives above the exchange, at your broker's servers or inside your trading platform. Tradovate's API documentation, for example, describes OCO as an "order strategy" that links two orders so that if one fills, the other is canceled. R Trader Pro keeps OCO orders, brackets and trailing stops on Rithmic's servers, so they keep working if your internet connection drops.
Why the cancel is a separate step
Because the exchange sees two independent orders, the cancel is a second message that goes out after the first fill is reported. In normal conditions that round trip is fast enough that you will never notice it. In a violent move, price can reach the second leg before the cancel lands, and both orders execute. That case is rare, but it is the reason an OCO order reduces risk without removing it. Treat the link as very reliable, not as guaranteed.
Components of an OCO Order

An OCO order has two legs, and each leg needs five settings that match the position you hold.
| Setting | Profit-target leg | Protective leg | What goes wrong if it is off |
|---|---|---|---|
| Order type | Limit | Stop or stop-limit | A stop fills with slippage, a stop-limit can fail to fill |
| Price | Beyond the market in your favor | Beyond the market against you | A leg placed on the wrong side fills at once |
| Side | Opposite your position | Opposite your position | A buy leg on a long position adds size instead of closing |
| Quantity | Equal to the open position | Equal to the open position | Too large opens a new position, too small leaves size unprotected |
| Time in force | Same as the other leg | Same as the other leg | One leg expires and the other is left alone |
The order type of each leg
The target leg is almost always a limit order, because you want that price or better and you are happy to wait for it.
The protective leg is the real decision. A plain stop becomes a market order once triggered. The SEC's investor bulletin on order types is clear that the stop price is a trigger, not a guaranteed execution price, and that the fill can deviate significantly from it in a fast market. A stop-limit becomes a limit order once triggered, which caps the price but may not fill at all if the market moves through the limit.
So the protective leg forces a trade-off. A stop gives you a certain exit at an uncertain price. A stop-limit gives you a certain price limit with an uncertain exit. Most futures traders choose the stop for the protective leg, because on the losing side, being out matters more than the last tick. A stop-limit that never fills leaves you holding the exact risk the order was meant to remove.
Platforms vary in what they allow on each leg. Tradovate's manual OCO lets you set two orders of any type at different prices, and its API accepts limit, stop, stop-limit, market-if-touched and trailing stop orders as OCO legs. Binance's spot OCO is fixed as one limit order and one stop-limit order with the same quantity.
Time in force
Schwab advises making the time in force identical on every order in a conditional group. If one leg is a day order and the other is good-till-canceled, the day leg can expire at the close and leave the other one working alone.
Related lesson: Stop orders
Why Traders Use OCO Orders
Traders use OCO orders because they turn two separate exit decisions into one decision made before the trade gets emotional.
- Both outcomes are planned up front. You have to name the target and the stop before you see how the trade behaves, which is when your judgment is cleanest.
- No orphaned orders. The unused leg is cleaned up for you, so a closed trade does not quietly turn into a new one.
- Protection while you are away. The stop and target work whether or not you are watching. With server-held orders, they work even if your platform disconnects.
- Less in-trade tinkering. Moving a target closer because you are nervous, or pulling a stop because "it will come back", is harder when both orders are already working.
- Defined reward to risk. The distance between entry and each leg gives you the trade's reward to risk ratio in ticks and dollars before you enter.
What an OCO order does not do is improve the trade itself. A stop placed inside normal noise is still inside normal noise when it is linked to a target, and a target picked because it "feels far enough" is still a guess. The pairing manages execution. The levels still have to come from your plan.
Using an OCO Order to Exit a Position
Exiting an open position is the main job of an OCO order. You hold the trade, and the pair defines the two ways out.
The orientation flips with your position, which is where a lot of beginner errors start:
| Position | Profit-target leg | Protective leg |
|---|---|---|
| Long | Sell limit above the market | Sell stop below the market |
| Short | Buy limit below the market | Buy stop above the market |
Both legs always take the opposite side of your position, because both are meant to close it.
There are two common ways to get an exit OCO in place:
- Attached at entry. A bracket or ATM strategy sends the pair automatically once the entry fills. Schwab describes a bracket as an order that places an OCO take-profit and stop right after the position opens.
- Added afterwards. You enter first, then place the pair by hand. Tradovate's one-time OCO, for example, is described as a way to add an exit strategy to an existing, unprotected position.
What to check once the exit pair is live
Look at the working orders list, not the chart lines. You want to see exactly two orders, on the closing side, at the prices you intended, with a quantity equal to your open position, and shown as linked. If the platform shows an OCO group or ID, both legs should carry the same one.
OCO Order Examples in Ticks and Dollars
These OCO order examples use one Micro E-mini S&P 500 (MES) futures contract. CME's contract specification is $5 times the S&P 500 index, with a minimum tick of 0.25 index points, so one tick is worth $1.25 and one full point is worth $5.00. All prices below are illustrative, not live quotes.
A long OCO exit pair on MES with costs included
You are long 1 MES at 6000.00. You place an OCO with a sell limit at 6010.00 and a sell stop at 5994.00.
- Target: 10.00 points, 40 ticks, $50.00.
- Stop: 6.00 points, 24 ticks, $30.00.
- Planned reward to risk: 1.67 to 1.
Now add friction as stated assumptions, so you can swap in your own numbers: a $2.00 round-turn cost per contract, and one tick of slippage on the stop leg because it fills as a market order.
| Outcome | Fill | Gross per contract | Net per contract | In R |
|---|---|---|---|---|
| Target fills | 6010.00 | +$50.00 | +$48.00 | +1.60R |
| Stop fills one tick worse | 5993.75 | -$31.25 | -$33.25 | -1.11R |
On paper the plan was +1.67R against -1R. After friction it is +1.60R against -1.11R, and the break-even win rate moves from 37.5% to 40.9%. Nothing dramatic. But if your setup only wins about 40% of the time, that small shift is the difference between a strategy that pays and one that slowly bleeds, so run the numbers with your real costs before you call the pair good.
A short OCO exit pair on MES
You are short 1 MES at 6000.00. The OCO is a buy limit at 5990.00 and a buy stop at 6005.00.
- Target: 10.00 points, 40 ticks, $50.00.
- Stop: 5.00 points, 20 ticks, $25.00.
- Reward to risk: 2 to 1.
Notice that both legs of a short OCO are buy orders. The target sits below the market and the stop sits above it, which is the reverse of a long position's sell limit above and sell stop below.
Scaled exits with two OCO order groups
You are long 2 MES at 6000.00 and want to take half off early and let half run. Instead of one OCO pair for 2 contracts, you place two separate OCO groups of 1 contract each:
- Group A: sell limit 6008.00, sell stop 5994.00.
- Group B: sell limit 6016.00, sell stop 5994.00.
| Path | Result (gross) |
|---|---|
| Both stops fill | -$60.00 |
| Group A target, then Group B stop | +$10.00 |
| Both targets fill | +$120.00 |
Group A's target pays $40.00 and Group B's target pays $80.00, while each stop costs $30.00. Because each group has its own link, the first target filling cancels only Group A's stop. Group B stays fully protected. This is the same idea thinkorswim calls "1st Triggers 2 OCO": one entry that sends two OCO exit pairs for half the size each.
Related lesson: Risk-reward ratio
Using OCO Orders to Enter Trades
An OCO can also be used to enter a trade, by placing two entry orders where only one should ever be filled. There are two common patterns, and they mean opposite things.
A breakout entry OCO
Imagine a market that has spent the morning between 5990.00 and 6010.00 (illustrative). You do not know which way it will break, so you place a buy stop at 6011.00 and a sell stop at 5989.00 as one OCO. If price breaks up, the buy stop fills and the sell stop is canceled, and vice versa.
The catch is that the entry OCO only manages the entry. Once one side fills, you hold a position with no stop unless you attached one. A false breakout that fills your buy stop at 6011.00 and then falls straight back into the range can do real damage if nothing is protecting it. The fix is to attach a bracket to each entry leg. If the buy stop fills, a stop at 6005.00 ($30.00 of risk on 1 MES) and a target at 6031.00 ($100.00) go out with it.
A range fade entry OCO
A range fade entry OCO bets on the edges holding instead of breaking. NinjaTrader's help guide gives this example: a market trading in a channel where you want to sell at resistance or buy at support, whichever comes first, using two limit orders. On an illustrative MES range of 5990.00 to 6010.00, that is a buy limit at 5990.00 and a sell limit at 6010.00. Whichever edge is touched first fills, and the other order is canceled so you do not end up long and short of the same range.
When an entry OCO order is the wrong tool
An entry OCO with no attached exits is just two ways to open an unprotected position. It also has a structural weak spot in a whipsaw: price spikes through one side, fills it, and reverses through the other side before the cancel lands. NinjaTrader lets each OCO entry carry its own ATM bracket, and other platforms have similar settings. Use them, or do not use the entry OCO.
Related lesson: Breakout trading
OCO Order Use Cases
OCO orders fit any situation where a trade has two defined outcomes and you do not want to manage them by hand.
- Locking in a day trade. You are in, the setup is working, and you want both the target and the stop on the server before you start second-guessing it.
- Range trading. Two limits at the range edges for an entry, or a target at the opposite edge and a stop just outside the range for an exit.
- Breakout setups. A buy stop above and a sell stop below a consolidation, with brackets attached to both.
- Scheduled news. Placing both exits before a data release instead of trying to click during the spike. Use wider spacing here, since a fast market is exactly when both legs of a tight pair can fill.
- Stepping away from the screen. If you must leave mid-trade, an OCO exit means the position is managed in both directions while you are gone.
- Switching exits mid-trade. Moving the stop to break-even or tightening the target. On most platforms you modify a leg in place, and the link stays intact.
- Layered exits. Separate OCO groups for each part of the position, for example one contract at a near target and one at a far target, so each part has its own target and its own stop.
Related lesson: Range trading
How to Place an OCO Order
Placing an OCO order follows the same logic on every platform, even though the buttons differ.
- Write both prices first. Decide the target and the stop from your setup before you open the order ticket.
- Confirm the side. Both legs close your position, so on a long both are sells, and on a short both are buys.
- Set the quantity to the open position, not the size you planned to trade.
- Choose each leg's order type on purpose: limit for the target, stop or stop-limit for the protection.
- Turn on OCO before placing the second order. A pair placed as two unlinked orders is not an OCO.
- Match the time in force on both legs.
- Check the working orders list to confirm both legs and the link.
Placing an OCO order in Tradovate
In the SuperDOM, choose "OCO-one time" from the ATM dropdown, then place your two orders on the price ladder. In the Trading menu, open the Advanced tab and select OCO. In the Order Ticket, switch to the Advanced view with the S → A toggle. Once OCO is enabled, you configure two orders of any type at different prices and send them. Once one fills, the other is canceled automatically.
Placing an OCO order in NinjaTrader 8
In Chart Trader, right-click inside the Chart Trader panel and enable OCO. Every order you place while it is enabled joins the same OCO group. The help guide warns that on older versions you must disable OCO before placing a new set, or new orders join the old group.
Placing an OCO order in TradeStation
From the Trade Bar, click the OCO/OSO button and choose an OCO, Bracket OCO or OSO order. A Bracket OCO is the exit version: two orders with the same symbol, quantity and action, with as many target and stop levels as you need.
Placing an OCO order in thinkorswim
thinkorswim lists OCO among its advanced orders, alongside "1st Triggers OCO" (an entry that sends an OCO exit pair) and "1st Triggers 2 OCO" and "3 OCO" for scaled exits. Schwab's guide notes you can set a bracket when placing the initial trade by selecting the symbol under the Trade tab and choosing Buy custom (or Sell custom).
OCO Order Behaviour Differs by Platform
The definition of an OCO order is the same everywhere, but what happens around the edges is not. Two behaviours vary the most, and both can leave an orphaned order behind.
Which platforms support OCO orders
Most active-trading platforms support OCO orders, but the exchange usually does not hold them. CME Globex has no OCO order type, so on futures the link always lives at the broker or platform. Tradovate, NinjaTrader, TradeStation, thinkorswim and R Trader Pro all offer OCO or bracket orders, and Binance offers OCO on spot trading.
If a platform or account type has no OCO, the workarounds are limited. A bracket or ATM strategy that attaches exits to the entry does the same job. Failing that, keep the stop as the only resting order and take profit by hand, because two unlinked exit orders left unattended is the exact problem OCO exists to solve.
Manual cancel of one leg
| Platform | Cancel one leg by hand | Source |
|---|---|---|
| Tradovate web trader | The other leg stays working | Tradovate Help Center |
| NinjaTrader 8 | The rest of the group is canceled | NinjaTrader help guide |
| Binance spot | The whole pair is canceled | Binance FAQ |
On Tradovate's web trader, canceling one order in an OCO pair does not automatically cancel the remaining order. That matters in a very ordinary moment: you cancel your stop to re-place it somewhere else, get distracted, and later flatten the position by hand. The old target is still sitting there, and if price reaches it, it opens a new position on a flat account. On NinjaTrader, canceling one order in the group cancels the others, so the same habit carries different risk on each platform.
Partial fills
Partial fills are the second split. Imagine you are long 4 MES at 6000.00 with an OCO sell limit at 6010.00 and a sell stop at 5994.00, and the limit fills 2 of the 4 contracts, banking $100.00.
- On TradeStation's Bracket OCO, the other leg's quantity is reduced by the filled amount. The stop drops to 2 contracts, and the remaining position is still protected, with $60.00 of risk to the stop.
- On Binance's spot OCO, a full or partial fill of the limit cancels the other order. That leaves the unfilled part of the target working with no stop behind it.
Neither design is wrong, but you need to know which one your platform uses before you size up.
Where OCO orders are held
OCO behaviour also depends on where the link and the orders live. Server-side orders, like R Trader Pro's, stay active if your computer crashes. Locally simulated orders do not. NinjaTrader's Simulated Stop orders, for example, are held on your PC and stop working if your connection or data feed drops. If the protective leg of your OCO is a locally held order, a disconnect removes your protection.
Related lesson: Partial fills
OCO vs Bracket Orders and Other Order Types

An OCO order is easiest to understand next to the order structures it is usually confused with.
| Structure | Entry included | What is linked | When a leg fills |
|---|---|---|---|
| OCO order | No | Two orders, usually a target and a stop | The other order is canceled |
| Bracket order | Yes | An entry plus an OCO exit pair | The exits go out once the entry fills, then act as an OCO |
| OSO or OTO order | Yes | A primary order that sends one or more orders | The secondary orders are submitted on the fill |
| OTOCO order | Yes | An entry that triggers an OCO pair | Same as a bracket |
| Single limit or stop | Either | Nothing | Only that order fills or rests |
| Limit and stop placed separately | Either | Nothing | The unfilled order stays live |
OCO order vs bracket order
They are not the same. An OCO order is the exit pair. A bracket order is an entry with that OCO pair attached. Schwab describes a bracket as placing an OCO take-profit and stop immediately after a position is opened. Binance calls the same idea OTOCO, and TradeStation builds it as an order-sends-order (OSO) parent with a Bracket OCO attached.
Use a bracket when you have not entered yet and want the exits created automatically on the fill. Use a standalone OCO when you are already in the trade, or when you want an entry OCO with two possible entries.
OCO vs separate limit and stop orders
A limit and a stop placed separately look identical on the chart, which is why this mistake is common. The difference only appears after the first fill. With an OCO, the other order disappears. Without one, it stays live on a flat position and waits to open a trade you did not plan.
Related lesson: Bracket orders
OCO Order Limitations and Execution Risks
OCO orders automate the cleanup, not the outcome. These are the cases where the pair does not do what traders assume.
Both legs can fill in a fast market
Because the link is held by your broker or platform, the cancel follows the first fill. If price reaches the second leg inside that window, both orders execute. It is unusual, and it is most likely with a tight pair in a fast market such as a data release.
Here is how that plays out on 1 MES, using illustrative prices. You are long at 6000.00 with a tight OCO: sell limit 6002.00 (8 ticks, $10.00) and sell stop 5998.00 ($10.00). A spike fills the target at 6002.00 for +$10.00, which on its own nets $8.00 after the assumed $2.00 round turn. The market then drops hard, the cancel arrives late, and the stop also triggers, filling at 5997.50. You are now short 1 contract you never meant to hold, and you are paying $4.00 in costs on two round turns.
| Flatten the accidental short at | Net result on the whole sequence |
|---|---|
| 5998.50 | +$1.00 |
| 5998.75 | -$0.25 |
| 6000.00 | -$6.50 |
| 6004.00 | -$26.50 |
The break-even flatten level is 5998.70, so anything at 5998.75 or above turns the winning trade into a loss. If price keeps running against the accidental short, the loss keeps growing until you close it. The response is always the same: flatten the unintended position first, then work out what happened.
Slippage, gaps and other OCO order limits
- Slippage on the stop leg. A stop becomes a market order once triggered, and the SEC notes the fill can deviate significantly from the stop price.
- No fill on a stop-limit leg. If price moves through the limit, the order may never execute and the position stays open.
- Gaps. A market that opens beyond your stop fills at the first available price, not your level.
- Partial fills. The surviving leg may resize or may be canceled, depending on the platform.
- Connection risk. Orders simulated on your own computer stop working when it disconnects.
Related lesson: Slippage explained
OCO Order Risk Management
An OCO order is a risk-management tool, but only if the risk is decided before the pair is placed.
- Size from the stop leg. Your position size should come from the dollar distance to the stop, not from how good the setup looks. On 1 MES, a 24-tick stop is $30.00 of risk before slippage.
- Decide the protective leg type deliberately. A stop market leg accepts slippage to guarantee an exit. A stop-limit leg protects the price but can leave you in the trade.
- Give the pair room into news. Tight pairs into a scheduled release are exactly where both legs are most likely to fill.
- Check for orphans after every exit. A flat position should have zero working orders. It takes two seconds, and it is the check that catches nearly every OCO failure on this list.
- Know your platform's cancel and partial-fill rules before you trade size.
- Use personal loss limits as a backstop. Many platforms let you set a daily loss limit that flattens and locks the account, which catches the rare case where the OCO pair fails.
Are stop-loss orders a good idea for OCO exits
For most active traders, yes. A stop-loss makes the losing outcome a decision you made calmly, instead of one you make while the position is moving against you. The costs are real, though: slippage on stop market orders and the chance of being stopped out just before price turns. An OCO pair keeps the stop in place while giving the trade a defined target on the other side.
Related lesson: Stop-loss orders and placement
Common OCO Order Mistakes
Most OCO order problems come from a handful of setup errors.
- Legs too close together. A tight pair is more exposed to noise and to both legs filling in a fast move.
- Wrong side on one leg. A buy stop on a long position adds to the trade instead of closing it.
- Quantity that does not match the position. Too large and the leg opens a new position; too small and part of the position is unprotected.
- Mismatched time in force. A day leg expires at the close and leaves the other leg working alone.
- Using an entry OCO with no exits attached. It opens a position with no stop.
- Canceling one leg and assuming the other went with it. On some platforms it does not.
- Forgetting the OCO toggle is still on. On NinjaTrader's older versions, new orders join the existing group unless you disable and re-enable OCO.
- Placing the two legs as separate orders and assuming they are linked because they look like a pair on the chart.
Advanced OCO Strategies and Automation
Once the basic pair is routine, OCO logic becomes a building block for more automated trade management.
Chaining OSO and OCO orders
Advanced OCO setups usually start by chaining. An order-sends-order parent with OCO children is the full bracket: an entry that, once filled, sends a target and a stop that cancel each other. TradeStation lets you attach a Bracket OCO to an OSO order, and thinkorswim's "1st Triggers OCO" family does the same with up to three OCO exit pairs.
OCO order groups across several orders and symbols
TradeStation's OCO is not limited to two orders or one symbol. It describes an OCO as a group of two or more parallel orders, potentially on different symbols, where filling any one cancels all the rest. That is useful for "whichever setup triggers first" plans across related markets.
OCO orders with a trailing stop leg
Some platforms let the protective leg be a trailing stop, so the stop follows price in your favor while the target stays fixed. Tradovate's API accepts trailing stop and trailing stop-limit orders as OCO legs. The trade-off is that a trailing leg can tighten into normal noise and take you out before the target ever gets a chance.
API and algorithmic OCO orders
Automated systems can place OCO orders directly. Tradovate's API has a dedicated OCO endpoint that returns an order ID and an OCO ID, and it requires orders that are not placed directly by a human to be flagged as automated. Code does not change the mechanics. The broker still cancels the second leg only after the first fill, so a fast market can fill both, and a partial fill still follows the platform's own rule. Test your system's handling of both cases before you trust it with size.
OCO and bracket orders on simulated funded accounts
On our accounts, Tradovate's ATM strategies place a stop loss and profit target once your entry fills, configured as OCO so either one cancels the other. R Trader Pro keeps OCO orders and brackets on Rithmic's servers, so they stay active if your connection drops. One limit worth knowing: bracket (ATM) orders are not supported while Group Trading on Tradovate, so copied trades need their exits managed separately. All positions also have to be closed by 4:45 PM ET.
Related lesson: Trailing stop orders
OCO Order FAQ
What does OCO mean in trading?
OCO means one-cancels-the-other. It is a pair of linked orders where the execution of one automatically cancels the other. Most traders use it for a profit target and a stop loss on the same position.
What is the 3-5-7 rule in trading?
It is a risk rule of thumb, not a standard. It says to risk at most 3% of the account per trade, keep total open risk at or under 5%, and aim for at least 7% on winning trades. Many traders use a smaller per-trade figure, such as 1-2%, especially on smaller accounts.
How do you set up an OCO in thinkorswim?
In thinkorswim, you set up an OCO by choosing OCO, or "1st Triggers OCO" for an entry that sends an exit pair, from the advanced order types in the order entry tools. To add a bracket at entry, select the symbol under the Trade tab and choose Buy custom or Sell custom. Then set the target and stop and confirm both appear as linked working orders.
Are stop-loss orders a good idea?
For most active traders, yes, because they make the losing exit a decision made before the trade. They can slip in fast markets and can stop you out before a reversal. Pairing the stop with a target in an OCO order keeps both exits planned.
Can both legs of an OCO order fill?
Yes, in rare cases. The link is held by the broker or platform, so the cancel follows the first fill, and a fast market can reach the second leg first. Check your position right after any leg fills and flatten anything you did not intend to hold.
Does canceling one OCO leg cancel the other?
Not always, because it depends on the platform. NinjaTrader cancels the rest of the group, and Binance cancels the whole pair. Tradovate's web trader leaves the other leg working.
Is an OCO order the same as a bracket order?
No. An OCO order is the linked exit pair. A bracket order is an entry with that OCO pair attached, sent automatically when the entry fills.
This guide is educational and is not financial or trading advice. Futures are leveraged, and losses can be larger than you expect, including when linked orders fill at worse prices or both legs execute. All prices, fills and costs shown are illustrative assumptions, not market data. OCO handling varies by broker and platform, so confirm how your account treats cancels, partial fills and disconnects. Evaluation and funded accounts at prop firms are simulated.

